[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] FSK with RFX2400
From: |
Jonathan Friedman |
Subject: |
Re: [Discuss-gnuradio] FSK with RFX2400 |
Date: |
Tue, 22 Jul 2008 12:37:58 -0700 |
> Secondally how can I remove the ISM bandpass filter which is by default
> there with RFX2400.
You have to de-solder it. Optionally (in case you don't want to remove
the part, since it will be difficult to reinstall it), you could
install a jumper (zero-ohm resistor) or (better) a small 10pF
capacitor in parallel (there is a pad), but this may cause some weird
side-effects if you use the USRP in the ISM band after installation.
Cheers,
-Jonathan
- [Discuss-gnuradio] FSK with RFX2400, kaleem ahmad, 2008/07/22
- Re: [Discuss-gnuradio] FSK with RFX2400,
Jonathan Friedman <=
- [Discuss-gnuradio] Re: FSK with RFX2400, Patrick Strasser, 2008/07/23
- Re: [Discuss-gnuradio] FSK with RFX2400, kaleem ahmad, 2008/07/23
- [Discuss-gnuradio] Re: FSK with RFX2400, Patrick Strasser, 2008/07/23
- Re: [Discuss-gnuradio] FSK with RFX2400, Firas Abbas, 2008/07/23
- Re: [Discuss-gnuradio] FSK with RFX2400, kaleem ahmad, 2008/07/24