[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Discuss-gnuradio] USRP2 PPS and REF
From: |
Suprin, Charles E. |
Subject: |
RE: [Discuss-gnuradio] USRP2 PPS and REF |
Date: |
Fri, 13 Feb 2009 14:43:17 -0500 |
Doug,
Working only on my single channel setup, what appears to happen is that there
is the time stamp for the first sample in the frame. The frame alignment seems
to remain a function of when the device was turned on.
Now if sync_every_pps worked with the 31 December 2008 firmware. I think I
need to wait for a newer FPGA/VHDL firmware release for that to happen.
Charles
-----Original Message-----
From: address@hidden [mailto:address@hidden On Behalf Of Douglas Geiger
Sent: Friday, February 13, 2009 2:02 PM
To: address@hidden
Subject: Re: [Discuss-gnuradio] USRP2 PPS and REF
Ok - so I have packets coming in from both USRP2's now, getting dumped
to their separate files.
My app prints out the timestamp of each frame that gets sent to the
copy handler: if my 1PPS source is working properly, should the
timestamps coming out of the two USRP2's be identical?
Another question: no matter what, there is going to be some time delay
between when I tell one USRP2 to start, and when I tell the other one to
start: with the timestamps I could do something like
align_on_samplenumbers (but with the timestamps - at least I could do
this in the copy handler where I have access to this information). Of
course this requires that the timestamps do end up being based on the
1PPS. Should I take that as a sign my USRP2's are not currently getting
sync'd to the 1PPS?
Thanks,
Doug
--
Doug Geiger
Research Assistant
Communications and Signal Processing Lab
Oklahoma State University
http://cspl.okstate.edu
address@hidden
address@hidden
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
- Re: [Discuss-gnuradio] USRP2 PPS and REF, (continued)
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Douglas Geiger, 2009/02/10
- RE: [Discuss-gnuradio] USRP2 PPS and REF, Suprin, Charles E., 2009/02/10
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Eric Blossom, 2009/02/10
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Douglas Geiger, 2009/02/10
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Douglas Geiger, 2009/02/10
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Johnathan Corgan, 2009/02/10
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Douglas Geiger, 2009/02/12
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Douglas Geiger, 2009/02/13
- RE: [Discuss-gnuradio] USRP2 PPS and REF, Newman, Timothy, 2009/02/13
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Matt Ettus, 2009/02/13
- RE: [Discuss-gnuradio] USRP2 PPS and REF,
Suprin, Charles E. <=
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Matt Ettus, 2009/02/13
- RE: [Discuss-gnuradio] USRP2 PPS and REF, Suprin, Charles E., 2009/02/13
- Re: [Discuss-gnuradio] USRP2 PPS and REF, Douglas Geiger, 2009/02/13