[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Transmitting 2 dbpsk signals
From: |
Maduike, Dumezie |
Subject: |
[Discuss-gnuradio] Transmitting 2 dbpsk signals |
Date: |
Tue, 17 Feb 2009 11:14:26 -0600 (CST) |
Hello everyone,
I am trying to transmit simultaneously from two USRPs using 'benchmark_tx.py'
to a third one acting as a relay with 'benchmark_rx.py' running. Do the python
scripts on the receiver's end such as 'pkt.py' use the access codes to
determine which type of modulation scheme the transmitters are running or is
there a different method in determining which type of mod scheme is used?
Also, when the two signals from the transmitting USRPs are sent to the relay
USRP, are the two signal phases automatically aligned or is this done somewhere
else in the ['dbpsk.py' or 'dqpsk.py', etc.] files?
Thanks in advance!
Dumezie
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] Transmitting 2 dbpsk signals,
Maduike, Dumezie <=