[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2 &DBSRX testing
From: |
Bruce Stansby |
Subject: |
Re: [Discuss-gnuradio] USRP2 &DBSRX testing |
Date: |
Mon, 23 Feb 2009 10:11:57 +0900 |
My apologies, newbie hoping it was a common newbie problem, details as
follows.
Hardware:
Twin Xeon quadcore X5355 processors.
Supermicro X7DBE motherboard
8 GB of ram
Software:
Ubuntu 8.04 Kernal 2.6.2-16-generic
I didn't install the software my supervisor did (he knows what he's
doing) but he used the latest from the trunk a few days ago, as the
tarball he originally used didn't show any USRP2 items.
If these a way to find a version number of the installed software please
let me know.
The memory card had the original version software on it and after it
didn't work he upgrade it with UR2_rev3 & txrx.bin.
Not sure about the where the daughter board_id shows up but I'm
presuming its the hex type number after the address@hidden sequence.
if so with the dbrx installed then its returning 0X001 also we are
getting Analog BB:0 and DDC:0, also there is no gain slider. When the
tvrx is installed we are getting 0X0040 anolog BB:756M DDC: 44M, and
the gain slider is present.
At a uninformed guess I am wondering if the dbrx is talking to the usrp2?
At the moment I'm trying to install the grc package but unfortunitly I
can't seem to get python lxml 2.00 to install.
Regards
----- Original Message -----
From: Eric Blossom <address@hidden>
Date: Monday, February 23, 2009 3:08 am
Subject: Re: [Discuss-gnuradio] USRP2 &DBSRX testing
To: RH200 <address@hidden>
Cc: address@hidden
> On Sun, Feb 22, 2009 at 06:16:28AM -0800, RH200 wrote:
> >
> > We have got a new USRP2 and TVRX and DBSRX recievers. Though the
> system seems
> > to work when the TVRX daughter board is installed using the USRP2
> fft
> > script, it does not seem to work with the DBSRX board installed.
> >
> > That is there seems to be just noise coming in regardless of what
> frequency> or bandwidth setting you are using. Does any one know of
> any special tricks
> > when using the DBSRX board?
> >
> >
> > Regards
>
> Attention everybody!
>
> When asking questions, it _really helps us help you_ if you tell us
> some basic information about your situation. At a minimum, tell us
> what version of GNU Radio you are running: tarball (which one) or
> trunk (which rev), your OS/version/distribution and architecture.
>
> In your specific case, which firmware are you running? Did you build
> it from source, or did you download it? Off the top of my head, I'm
> not sure when the support for the DBSRX went into the trunk, but it's
> there.
>
> What daughterboard_id does usrp2_fft report?
>
> Eric
>