[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] question to I and Q routing
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] question to I and Q routing |
Date: |
Wed, 1 Apr 2009 07:32:59 -0700 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Wed, Apr 01, 2009 at 08:15:47AM +0000, feldmaus wrote:
> Hi All,
>
> i have a signal generator which is only connected to 1 SMA connector
> at the LFRX daughterboard.
> In the gnuradio documentation is written:
> "Each of the 4 ADC's can be routed to either of I or the Q input
> of any of the 4 DDC's."
>
> But if i store the data coming from the usrp to disk, i have got
> real and imag values, which represents the I and Q values.
> So how is the Q part created ?
> Or do i have to create it by connect my signal generator to 2 SMA connectors ?
>
> My test signal is a sine signal.
>
> Regards Markus
Markus, these are all great questions, but I have the suspicion that
you haven't studied the USRP FAQ. For starters please read and
understand:
http://gnuradio.org/trac/wiki/UsrpRfxDiagrams
http://gnuradio.org/trac/attachment/wiki/UsrpFAQ/USRP_Documentation.pdf
Euler's identity
CORDIC
Thanks!
Eric