Re: [Discuss-gnuradio] USRP Basics questions

[Josh Blum]

Somya Ajmera wrote:
> HI Josh, we have basic TX , RX daughter board with us. also what is that range 
> you have mentioned into your reply is for?

Many times, users give the usrp sink numbers between +/- 1.0 and there 
is no transmit power. Just to double check, you should be giving usrp 
numbers around +/- 10e3 :-)

As far as how you can see the signal:

You can hook up an oscilloscope to one of the SMA connectors on the 
basic TX (TXA or TXB)

Or, connect the basic RX to the basic TX with SMA to SMA connector, and 
use a program like usrp_oscope.py or usrp_fft.py to look at the received 
signal.

-Josh