Re: [Discuss-gnuradio] [Douglas Geiger BBN 802.11b] Porting code on USRP2 problems

[Colby Boyer]

Has anyone been able to get 2Mbps to work, which uses DQPSK instead of DBPSK?  I have had no luck, even with the test script. . .

--Colby

On Sun, Apr 26, 2009 at 9:39 PM, Colby Boyer <address@hidden> wrote:

I think some of the work my group will require porting the mac layer to the USRP2. I'll keep the list posted.

--Colby

On Sat, Apr 25, 2009 at 2:32 PM, <address@hidden> wrote:

The next step is to convert the simple_mac.py inorder to work with USRP2.
Who is interested in this work?

Ben Yahmed

> It was a firmware problem, and after updating the latest firmware I was
> able
> to transmit/receive at 1Mbps.
>
> -Colby
>
> Good work everyone! =)
>
> On Fri, Apr 24, 2009 at 11:23 AM, Colby Boyer <address@hidden>
> wrote:
>
>> Hi,
>>
>> I am unable to replicate the results.  Are you using the code from the
>> CGRAN repo without any modifcations?
>>
>> I am also receiving a "usrp2::ctor reset_db failed" error.  Could this
>> be a
>> problem?
>>
>> Thanks,
>> Colby
>>
>>
>> On Fri, Apr 24, 2009 at 10:41 AM, Eric Blossom <address@hidden> wrote:
>>
>>> On Fri, Apr 24, 2009 at 02:15:36PM +0200, Ben Yahmed wrote:
>>> > Good News!!!!
>>> > I finally succeeded to receive with an USRP2 packets sent with
>>> another
>>> > USRP2. I tryed to modify the parameters and found the magic
>>> combination:
>>>
>>> Yeah!
>>>
>>> Eric
>>>
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> address@hidden
>>> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>
>>
>