[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Software troubes - gr_vmcircbuf ...?
From: |
Eric Blossom |
Subject: |
Re: [Discuss-gnuradio] Software troubes - gr_vmcircbuf ...? |
Date: |
Fri, 8 May 2009 18:32:23 -0700 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Fri, May 08, 2009 at 02:04:59PM -0600, wallen wrote:
> I've been trying to get Gnuradio running with my USRP2, and am still
> having some troubles. My computer is an older Dell Inspiron 5100 laptop
> running Debian (Lenny). I've installed a D-Link DGE-660TD Gigabit
> Cardbus adapter, and have compiled what I believe is the most recent
> release of the code per the instructions in the README file.
>
> I can find the USRP2 by running the find_usrps command, but oddly enough
> this occasionally segfaults. So far what looks like the most intriguing
> error message I got when trying to run usrp2_fft.py. This looks like:
>
> usrp2_fft.py
> usrp2: failed to enable realtime scheduling
Edit /etc/security/limits.conf and add this line:
@usrp - rtprio 50
then logout and back in.
> gr_vmcircbuf_createfilemapping: createfilemapping is not available
This is a little odd. Does it pass "make check"?
> usrp2: channel 0 not receiving
> usrp2::rx_samples() failed
>
> Does this provide any clues to those of you more familiar with the
> software?
Does it pass "make check"?
> I've tried flashing the firmware, and that didn't change anything. I've
> also tried swapping out my USRP2 with a box running on a different
> machine seems to work, so this seems likely to be a software problem.
>
> Any ideas what could be going on here?
>
> - Wayde
Eric