[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Re: USRP with USB/IP
From: |
Alberto Trentadue |
Subject: |
[Discuss-gnuradio] Re: USRP with USB/IP |
Date: |
Sat, 6 Jun 2009 00:23:54 +0200 (CEST) |
On Fri, 2009-06-05 at 12:14 -0700, Firas Abbas wrote:
> Hi,
>
> --- On Fri, 6/5/09, Patrick Strasser <patrick.
address@hidden> wrote:
> > Hello!
> >
> > ednet[1] and RaidSonic[2] sell boxes that can forward USB
> > ports over
via the Linux USB/IP[3] system.
> >
> > Patrick
> >
>
> From the web site the transfer rate of these boxes is
10/100Mb/s. So theoretically it should transfer a maximum of 12.5MByte/sec
which is far below the required 32Mbyte/sec
of USRP1.
Hello Firas.
Just for my understanding:
The 32Mbyte/s requirement is for a full speed - 4 channel USRP
operation.
But if we suppose a simpler application, e.g. 1 TX/RX channel only, wouldn't
this fit in the USB/IP?
Thanks
for your reply.
BR
Alberto
Promozione di Primavera ! Stampa le tue foto nei formati 13x17 e 13x19 a soli
0,11 euro.
http://photo.tiscali.it
- [Discuss-gnuradio] Re: USRP with USB/IP,
Alberto Trentadue <=