[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] DBS-RX satellite connection
From: |
Martin DvH |
Subject: |
Re: [Discuss-gnuradio] DBS-RX satellite connection |
Date: |
Mon, 08 Jun 2009 17:55:54 +0200 |
On Sat, 2009-06-06 at 21:57 -0700, Eric Blossom wrote:
> On Sat, Jun 06, 2009 at 02:30:05AM -0400, davek wrote:
> > I would like to get my usrp conneced to my TVRO satellite dish. I am
> > wondering...
> > Is the DBSRX daughter card suitable for direct connection to a satellite
> > LNB?
>
> Yes.
>
> > I am thinking it will be easier to let the sat receiver do the lnb
> > power and polarization control
> > Is it be safe to connect to the lnb loop-through connection on
> > standard satellite receivers?
>
> I don't know.
>
I have done that in the past and it worked fine.
(I did analog satelite TV reception which is FM modulated.
I just switched the AM-demod block in usrp_tv_receive.py for a
quadrature-demod block (=FM demodulator) and reduced decimation and got
an image. You get some distortion because you can't get the complete
bandwidth of a sattelite channel usring a USRP-1. (Best I got was 16 MHz
using 8 bits/sample and decimation 4 )
Using the sat-receiver for power and polarisation is very conveniant.
You can use the remote to switch polarisation.
Greetings,
Martin
> Eric
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>