[Discuss-gnuradio] Problem in executing GRC

[udadidd]

Hi 
I could install grc successfully...
But when i try to execute it, i get the error:

Xlib:  extension "RANDR" missing on display "/tmp/launch-zFqALC/:0".
Traceback (most recent call last):
  File "/usr/local/bin/grc", line 33, in <module>
    from gnuradio.grc.platforms.base.Constants import VERSION
ImportError: No module named grc.platforms.base.Constants

a) I have checked my PYTHONPATH :
/opt/local/lib/python2.5/site-packages:/opt/gnuradio/lib/python2.5/site-packages
b) I have added 
     export BOOST_PREFIX=/opt/boost_1_38_0
     export LD_LIBRARY_PATH=$BOOST_PREFIX/lib
but i did not understand the sigificance of adding this as i do not find a
folder of boost_1_38_0 in the /opt directory!!

I still cannot execute the grc on my command prompt!!

Kindly help!


Somya Ajmera wrote:
> 
> Hi , I am facing
> a problem in installing gnuradio-3.2. I was able to install
> gnuradio-3.1.3 properly but when I tried to install this  newer version
> on the top of the older version, maximum of the packages are not
> getting configured including gnuradio-core and usrp. 
> 
> When I
> started installing this newer version I faced the same problem with the
> major packages, then one of my friend suggested to add the library path
> for some missing packages (mainly gsl-which was already installed on my
> system but the configure script was not able to detect it) and then by
> doing that I was able to get maximum of them configured and then I did
> the usual make, make check and make install. After that when I tried to
> run grc it got the following error :
> 
> Traceback (most recent call last):
>   File "/usr/local/bin/grc", line 25, in <module>
>     from gnuradio.grc.platforms.base.Constants import VERSION
> ImportError: No module named grc.platforms.base.Constants
> address@hidden gnuradio]# 
> 
> As
> you suggested in the reply, I sett ed the path for Python, but was not
> able to get it over. but I was able to run any other python example
> namely the audio_tone one.Then I again tried to configure the newer
> version without adding any library path but faced the same problem with
> the packages.  
> 
> I am attaching the log ./configure file for the reference (open it with
> word pad). I am a newbie to Linux and to gnuradio. I would really
> appreciate if anybody can help me regarding this matter.
> 
> Thanks & Regards,
> Somya Ajmera
> 
> 
>       New Email addresses available on Yahoo!
> Get the Email name you&#39;ve always wanted on the new @ymail and
> @rocketmail. 
> Hurry before someone else does!
> http://mail.promotions.yahoo.com/newdomains/aa/
> checking for getrusage... yes
> checking for sched_setscheduler... (cached) yes
> checking for pthread_setschedparam... yes
> checking for sigaction... (cached) yes
> checking for snprintf... (cached) yes
> checking for USB... no
> checking usb.h usability... yes
> checking usb.h presence... yes
> checking for usb.h... yes
> checking for library containing usb_bulk_write... -lusb
> checking for sdcc... no
> checking for asx8051... no
> USRP requires sdcc. sdcc not found. See http://sdcc.sf.net
> Unable to find firmware compiler SDCC.
> Not building component usrp.
> checking whether host_os is linux*... yes
> checking for arpa/inet.h... (cached) yes
> checking for byteswap.h... (cached) yes
> checking linux/if_packet.h usability... yes
> checking linux/if_packet.h presence... yes
> checking for linux/if_packet.h... yes
> checking sys/socket.h usability... yes
> checking sys/socket.h presence... yes
> checking for sys/socket.h... yes
> checking sys/un.h usability... yes
> checking sys/un.h presence... yes
> checking for sys/un.h... yes
> checking for struct msghdr.msg_control... yes
> checking for struct msghdr.msg_accrights... no
> checking for struct cmsgcred.cmcred_uid... no
> checking for struct ucred.uid... yes
> Component usrp2 passed configuration checks; building.
> Component gr-usrp requires usrp, which is not being built or specified via
> pre-installed files.
> Not building component gr-usrp.
> Component gr-usrp2 requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-usrp2.
> Component gr-gcell requires gcell, which is not being built or specified
> via pre-installed files.
> Not building component gr-gcell.
> Component gr-msdd6000 requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> checking for netinet/in.h... (cached) yes
> checking for arpa/inet.h... (cached) yes
> checking for sys/socket.h... (cached) yes
> checking netdb.h usability... yes
> checking netdb.h presence... yes
> checking for netdb.h... yes
> Not building component gr-msdd6000.
> Component gr-audio-alsa requires gnuradio-core, which is not being built
> or specified via pre-installed files.
> Not building component gr-audio-alsa.
> Component gr-audio-jack requires gnuradio-core, which is not being built
> or specified via pre-installed files.
> Not building component gr-audio-jack.
> Component gr-audio-oss requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-audio-oss.
> Component gr-audio-osx requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-audio-osx.
> Component gr-audio-portaudio requires gnuradio-core, which is not being
> built or specified via pre-installed files.
> Not building component gr-audio-portaudio.
> Component gr-audio-windows requires gnuradio-core, which is not being
> built or specified via pre-installed files.
> Not building component gr-audio-windows.
> Component gr-atsc requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-atsc.
> Component gr-comedi requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-comedi.
> Component gr-cvsd-vocoder requires gnuradio-core, which is not being built
> or specified via pre-installed files.
> Not building component gr-cvsd-vocoder.
> Component gr-gpio requires usrp, which is not being built or specified via
> pre-installed files.
> Not building component gr-gpio.
> Component gr-gsm-fr-vocoder requires gnuradio-core, which is not being
> built or specified via pre-installed files.
> Not building component gr-gsm-fr-vocoder.
> Component gr-pager requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-pager.
> Component gr-radar-mono requires usrp, which is not being built or
> specified via pre-installed files.
> Not building component gr-radar-mono.
> Component gr-radio-astronomy requires gnuradio-core, which is not being
> built or specified via pre-installed files.
> Not building component gr-radio-astronomy.
> Component gr-trellis requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-trellis.
> Component gr-video-sdl requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-video-sdl.
> Component gr-wxgui requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-wxgui.
> Component gr-qtgui requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-qtgui.
> Component gr-sounder requires usrp, which is not being built or specified
> via pre-installed files.
> Not building component gr-sounder.
> Component gr-utils requires gnuradio-core, which is not being built or
> specified via pre-installed files.
> Not building component gr-utils.
> Component gnuradio-examples requires gnuradio-core, which is not being
> built or specified via pre-installed files.
> Not building component gnuradio-examples.
> Component grc requires gr-wxgui, which is not being built or specified via
> pre-installed files.
> checking for xdg-mime... true
> Not building component grc.
> checking whether gcc accepts -Wall... yes
> checking whether gcc accepts -Werror-implicit-function-declaration... yes
> checking whether g++ accepts -Wall... yes
> checking whether g++ accepts -Woverloaded-virtual... yes
> configure: creating ./config.status
> config.status: creating gruel/Makefile
> config.status: creating gruel/gruel.pc
> config.status: creating gruel/src/Makefile
> config.status: creating gruel/src/include/Makefile
> config.status: creating gruel/src/include/gruel/Makefile
> config.status: creating gruel/src/include/gruel/inet.h
> config.status: creating gruel/src/lib/Makefile
> config.status: creating omnithread/Makefile
> config.status: creating omnithread/gnuradio/Makefile
> config.status: creating omnithread/gnuradio-omnithread.pc
> config.status: creating gcell/Makefile
> config.status: creating gcell/gcell.pc
> config.status: creating gcell/gcell_spu.pc
> config.status: creating gcell/include/Makefile
> config.status: creating gcell/include/gcell/Makefile
> config.status: creating gcell/include/gcell/spu/Makefile
> config.status: creating gcell/lib/Makefile
> config.status: creating gcell/lib/spu/Makefile
> config.status: creating gcell/lib/general/Makefile
> config.status: creating gcell/lib/wrapper/Makefile
> config.status: creating gcell/lib/runtime/Makefile
> config.status: creating gcell/apps/Makefile
> config.status: creating gcell/apps/spu/Makefile
> config.status: creating gcell/ibm/Makefile
> config.status: creating gnuradio-core/Makefile
> config.status: creating gnuradio-core/gnuradio-core.pc
> config.status: creating gnuradio-core/doc/Doxyfile
> config.status: creating gnuradio-core/doc/Makefile
> config.status: creating gnuradio-core/doc/other/Makefile
> config.status: creating gnuradio-core/doc/xml-swig/Makefile
> config.status: creating gnuradio-core/src/Makefile
> config.status: creating gnuradio-core/src/gen_interpolator_taps/Makefile
> config.status: creating gnuradio-core/src/lib/Makefile
> config.status: creating gnuradio-core/src/lib/filter/Makefile
> config.status: creating gnuradio-core/src/lib/g72x/Makefile
> config.status: creating gnuradio-core/src/lib/general/Makefile
> config.status: creating gnuradio-core/src/lib/general/gr_prefix.cc
> config.status: creating gnuradio-core/src/lib/gengen/Makefile
> config.status: creating gnuradio-core/src/lib/io/Makefile
> config.status: creating gnuradio-core/src/lib/missing/Makefile
> config.status: creating gnuradio-core/src/lib/reed-solomon/Makefile
> config.status: creating gnuradio-core/src/lib/viterbi/Makefile
> config.status: creating gnuradio-core/src/lib/runtime/Makefile
> config.status: creating gnuradio-core/src/lib/swig/Makefile
> config.status: creating gnuradio-core/src/python/Makefile
> config.status: creating gnuradio-core/src/python/bin/Makefile
> config.status: creating gnuradio-core/src/python/gnuradio/Makefile
> config.status: creating gnuradio-core/src/python/gnuradio/blks2/Makefile
> config.status: creating
> gnuradio-core/src/python/gnuradio/blks2impl/Makefile
> config.status: creating gnuradio-core/src/python/gnuradio/gr/Makefile
> config.status: creating gnuradio-core/src/python/gnuradio/gr/run_tests
> config.status: creating gnuradio-core/src/python/gnuradio/gru/Makefile
> config.status: creating gnuradio-core/src/python/gnuradio/gruimpl/Makefile
> config.status: creating gnuradio-core/src/python/gnuradio/vocoder/Makefile
> config.status: creating gnuradio-core/src/tests/Makefile
> config.status: creating gnuradio-core/src/utils/Makefile
> config.status: creating pmt/Makefile
> config.status: creating pmt/pmt.pc
> config.status: creating pmt/doc/Makefile
> config.status: creating pmt/src/Makefile
> config.status: creating pmt/src/lib/Makefile
> config.status: creating pmt/src/scheme/Makefile
> config.status: creating pmt/src/scheme/gnuradio/Makefile
> config.status: creating mblock/Makefile
> config.status: creating mblock/mblock.pc
> config.status: creating mblock/doc/Makefile
> config.status: creating mblock/src/Makefile
> config.status: creating mblock/src/include/Makefile
> config.status: creating mblock/src/include/mblock/Makefile
> config.status: creating mblock/src/lib/Makefile
> config.status: creating mblock/src/scheme/Makefile
> config.status: creating mblock/src/scheme/gnuradio/Makefile
> config.status: creating usrp/Makefile
> config.status: creating usrp/usrp.pc
> config.status: creating usrp/usrp-inband.pc
> config.status: creating usrp/usrp.iss
> config.status: creating usrp/doc/Doxyfile
> config.status: creating usrp/doc/Makefile
> config.status: creating usrp/doc/other/Makefile
> config.status: creating usrp/host/Makefile
> config.status: creating usrp/host/misc/Makefile
> config.status: creating usrp/host/lib/Makefile
> config.status: creating usrp/host/lib/inband/Makefile
> config.status: creating usrp/host/lib/legacy/Makefile
> config.status: creating usrp/host/lib/legacy/std_paths.h
> config.status: creating usrp/host/swig/Makefile
> config.status: creating usrp/host/apps/Makefile
> config.status: creating usrp/host/apps-inband/Makefile
> config.status: creating usrp/firmware/Makefile
> config.status: creating usrp/firmware/include/Makefile
> config.status: creating usrp/firmware/lib/Makefile
> config.status: creating usrp/firmware/src/Makefile
> config.status: creating usrp/firmware/src/common/Makefile
> config.status: creating usrp/firmware/src/usrp2/Makefile
> config.status: creating usrp/fpga/Makefile
> config.status: creating usrp/fpga/rbf/Makefile
> config.status: creating usrp/fpga/rbf/rev2/Makefile
> config.status: creating usrp/fpga/rbf/rev4/Makefile
> config.status: creating usrp2/Makefile
> config.status: creating usrp2/host/Makefile
> config.status: creating usrp2/host/usrp2.pc
> config.status: creating usrp2/host/include/Makefile
> config.status: creating usrp2/host/include/usrp2/Makefile
> config.status: creating usrp2/host/lib/Makefile
> config.status: creating usrp2/host/apps/Makefile
> config.status: creating gr-usrp/Makefile
> config.status: creating gr-usrp/gnuradio-usrp.pc
> config.status: creating gr-usrp/src/Makefile
> config.status: creating gr-usrp/src/run_tests
> config.status: creating gr-usrp/apps/Makefile
> config.status: creating gr-usrp2/Makefile
> config.status: creating gr-usrp2/src/Makefile
> config.status: creating gr-usrp2/src/run_tests
> config.status: creating gr-gcell/Makefile
> config.status: creating gr-gcell/src/Makefile
> config.status: creating gr-gcell/src/examples/Makefile
> config.status: creating gr-gcell/src/run_tests
> config.status: creating gr-msdd6000/Makefile
> config.status: creating gr-msdd6000/src/Makefile
> config.status: creating gr-audio-alsa/Makefile
> config.status: creating gr-audio-alsa/gr-audio-alsa.pc
> config.status: creating gr-audio-alsa/src/Makefile
> config.status: creating gr-audio-alsa/src/run_tests
> config.status: creating gr-audio-jack/Makefile
> config.status: creating gr-audio-jack/src/Makefile
> config.status: creating gr-audio-jack/src/run_tests
> config.status: creating gr-audio-oss/Makefile
> config.status: creating gr-audio-oss/src/Makefile
> config.status: creating gr-audio-oss/src/run_tests
> config.status: creating gr-audio-osx/Makefile
> config.status: creating gr-audio-osx/src/Makefile
> config.status: creating gr-audio-osx/src/run_tests
> config.status: creating gr-audio-portaudio/Makefile
> config.status: creating gr-audio-portaudio/src/Makefile
> config.status: creating gr-audio-portaudio/src/run_tests
> config.status: creating gr-audio-windows/Makefile
> config.status: creating gr-audio-windows/src/Makefile
> config.status: creating gr-audio-windows/src/run_tests
> config.status: creating gr-atsc/Makefile
> config.status: creating gr-atsc/doc/Makefile
> config.status: creating gr-atsc/src/Makefile
> config.status: creating gr-atsc/src/lib/Makefile
> config.status: creating gr-atsc/src/python/Makefile
> config.status: creating gr-atsc/src/python/run_tests
> config.status: creating gr-comedi/Makefile
> config.status: creating gr-comedi/src/Makefile
> config.status: creating gr-comedi/src/run_tests
> config.status: creating gr-cvsd-vocoder/Makefile
> config.status: creating gr-cvsd-vocoder/src/Makefile
> config.status: creating gr-cvsd-vocoder/src/lib/Makefile
> config.status: creating gr-cvsd-vocoder/src/python/Makefile
> config.status: creating gr-cvsd-vocoder/src/python/run_tests
> config.status: creating gr-gpio/Makefile
> config.status: creating gr-gpio/src/Makefile
> config.status: creating gr-gpio/src/fpga/Makefile
> config.status: creating gr-gpio/src/fpga/include/Makefile
> config.status: creating gr-gpio/src/fpga/top/Makefile
> config.status: creating gr-gpio/src/fpga/lib/Makefile
> config.status: creating gr-gpio/src/fpga/rbf/Makefile
> config.status: creating gr-gpio/src/python/Makefile
> config.status: creating gr-gsm-fr-vocoder/Makefile
> config.status: creating gr-gsm-fr-vocoder/src/Makefile
> config.status: creating gr-gsm-fr-vocoder/src/lib/Makefile
> config.status: creating gr-gsm-fr-vocoder/src/lib/gsm/Makefile
> config.status: creating gr-gsm-fr-vocoder/src/python/Makefile
> config.status: creating gr-gsm-fr-vocoder/src/python/run_tests
> config.status: creating gr-pager/Makefile
> config.status: creating gr-pager/src/Makefile
> config.status: creating gr-pager/src/run_tests
> config.status: creating gr-radar-mono/Makefile
> config.status: creating gr-radar-mono/doc/Makefile
> config.status: creating gr-radar-mono/src/Makefile
> config.status: creating gr-radar-mono/src/fpga/Makefile
> config.status: creating gr-radar-mono/src/fpga/top/Makefile
> config.status: creating gr-radar-mono/src/fpga/lib/Makefile
> config.status: creating gr-radar-mono/src/fpga/models/Makefile
> config.status: creating gr-radar-mono/src/fpga/tb/Makefile
> config.status: creating gr-radar-mono/src/lib/Makefile
> config.status: creating gr-radar-mono/src/python/Makefile
> config.status: creating gr-radar-mono/src/python/run_tests
> config.status: creating gr-radio-astronomy/Makefile
> config.status: creating gr-radio-astronomy/src/Makefile
> config.status: creating gr-radio-astronomy/src/lib/Makefile
> config.status: creating gr-radio-astronomy/src/python/Makefile
> config.status: creating gr-radio-astronomy/src/python/run_tests
> config.status: creating gr-trellis/Makefile
> config.status: creating gr-trellis/doc/Makefile
> config.status: creating gr-trellis/src/Makefile
> config.status: creating gr-trellis/src/lib/Makefile
> config.status: creating gr-trellis/src/python/Makefile
> config.status: creating gr-trellis/src/python/run_tests
> config.status: creating gr-trellis/src/examples/Makefile
> config.status: creating gr-trellis/src/examples/fsm_files/Makefile
> config.status: creating gr-video-sdl/Makefile
> config.status: creating gr-video-sdl/src/Makefile
> config.status: creating gr-video-sdl/src/run_tests
> config.status: creating gr-wxgui/Makefile
> config.status: creating gr-wxgui/gr-wxgui.pc
> config.status: creating gr-wxgui/src/Makefile
> config.status: creating gr-wxgui/src/python/Makefile
> config.status: creating gr-wxgui/src/python/plotter/Makefile
> config.status: creating gr-qtgui/Makefile
> config.status: creating gr-qtgui/src/Makefile
> config.status: creating gr-qtgui/src/lib/Makefile
> config.status: creating gr-qtgui/src/python/Makefile
> config.status: creating gr-sounder/Makefile
> config.status: creating gr-sounder/doc/Makefile
> config.status: creating gr-sounder/src/Makefile
> config.status: creating gr-sounder/src/fpga/Makefile
> config.status: creating gr-sounder/src/fpga/top/Makefile
> config.status: creating gr-sounder/src/fpga/lib/Makefile
> config.status: creating gr-sounder/src/fpga/tb/Makefile
> config.status: creating gr-sounder/src/lib/Makefile
> config.status: creating gr-sounder/src/python/Makefile
> config.status: creating gr-sounder/src/python/run_tests
> config.status: creating gr-utils/Makefile
> config.status: creating gr-utils/src/Makefile
> config.status: creating gr-utils/src/lib/Makefile
> config.status: creating gr-utils/src/python/Makefile
> config.status: creating gnuradio-examples/Makefile
> config.status: creating gnuradio-examples/c++/Makefile
> config.status: creating gnuradio-examples/python/Makefile
> config.status: creating gnuradio-examples/python/apps/hf_explorer/Makefile
> config.status: creating gnuradio-examples/python/apps/hf_radio/Makefile
> config.status: creating gnuradio-examples/python/apps/Makefile
> config.status: creating gnuradio-examples/python/audio/Makefile
> config.status: creating gnuradio-examples/python/digital/Makefile
> config.status: creating gnuradio-examples/python/digital_voice/Makefile
> config.status: creating gnuradio-examples/python/digital-bert/Makefile
> config.status: creating gnuradio-examples/python/mp-sched/Makefile
> config.status: creating gnuradio-examples/python/multi-antenna/Makefile
> config.status: creating gnuradio-examples/python/multi_usrp/Makefile
> config.status: creating gnuradio-examples/python/network/Makefile
> config.status: creating gnuradio-examples/python/ofdm/Makefile
> config.status: creating gnuradio-examples/python/usrp/Makefile
> config.status: creating gnuradio-examples/python/usrp2/Makefile
> config.status: creating grc/src/grc_gnuradio/Makefile
> config.status: creating grc/src/grc_gnuradio/wxgui/Makefile
> config.status: creating grc/src/grc_gnuradio/blks2/Makefile
> config.status: creating grc/src/grc_gnuradio/usrp/Makefile
> config.status: creating grc/src/Makefile
> config.status: creating grc/src/platforms/Makefile
> config.status: creating grc/src/platforms/base/Makefile
> config.status: creating grc/src/platforms/python/Makefile
> config.status: creating grc/src/platforms/python/utils/Makefile
> config.status: creating grc/src/platforms/gui/Makefile
> config.status: creating grc/src/utils/Makefile
> config.status: creating grc/src/gui/Makefile
> config.status: creating grc/examples/Makefile
> config.status: creating grc/examples/xmlrpc/Makefile
> config.status: creating grc/examples/usrp/Makefile
> config.status: creating grc/examples/audio/Makefile
> config.status: creating grc/examples/simple/Makefile
> config.status: creating grc/examples/trellis/Makefile
> config.status: creating grc/Makefile
> config.status: creating grc/data/Makefile
> config.status: creating grc/data/platforms/Makefile
> config.status: creating grc/data/platforms/base/Makefile
> config.status: creating grc/data/platforms/python/Makefile
> config.status: creating grc/data/platforms/python/blocks/Makefile
> config.status: creating grc/scripts/Makefile
> config.status: creating grc/freedesktop/Makefile
> config.status: creating Makefile
> config.status: creating run_tests.sh
> config.status: creating config/Makefile
> config.status: creating config.h
> config.status: executing depfiles commands
> config.status: executing libtool commands
> config.status: executing swig_deps commands
> config.status: executing swig_gcell_deps commands
> config.status: executing run_tests_build commands
> === configuring in usrp2/firmware
> (/home/somya/Download/gnuradio/usrp2/firmware)
> configure: running /bin/sh ./configure.gnu --disable-option-checking
> '--prefix=/usr/local'  --cache-file=/dev/null --srcdir=.
> configure: WARNING: If you wanted to set the --build type, don't use
> --host.
>     If a cross compiler is detected then cross compile mode will be used.
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for mb-strip... no
> checking for strip... strip
> Component usrp2 passed configuration checks; building.
> checking for style of include used by make... GNU
> checking for mb-gcc... no
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables... 
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking dependency style of gcc... gcc3
> checking how to run the C preprocessor... gcc -E
> checking for mb-ranlib... no
> checking for ranlib... ranlib
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking arpa/inet.h usability... yes
> checking arpa/inet.h presence... yes
> checking for arpa/inet.h... yes
> checking netinet/in.h usability... yes
> checking netinet/in.h presence... yes
> checking for netinet/in.h... yes
> checking byteswap.h usability... yes
> checking byteswap.h presence... yes
> checking for byteswap.h... yes
> checking whether byte ordering is bigendian... no
> checking for mb-gcc... no
> usrp2 firmware requires mb-gcc.  Not found
> Not building component usrp2-firmware.
> configure: creating ./config.status
> config.status: creating apps/Makefile
> config.status: creating include/Makefile
> config.status: creating lib/Makefile
> config.status: creating Makefile
> config.status: creating config/Makefile
> config.status: creating config.h
> config.status: executing depfiles commands
> *********************************************************************
> The following components were skipped either because you asked not
> to build them or they didn't pass configuration checks:
> 
> usrp2-firmware
> 
> These components will not be built.
> 
> 
> *********************************************************************
> The following GNU Radio components have been successfully configured:
> 
> config
> gruel
> omnithread
> pmt
> mblock
> usrp2
> 
> You my now run the make command to build these components.
> 
> *********************************************************************
> The following components were skipped either because you asked not
> to build them or they didn't pass configuration checks:
> 
> gcell
> gnuradio-core
> usrp
> gr-usrp
> gr-usrp2
> gr-gcell
> gr-msdd6000
> gr-audio-alsa
> gr-audio-jack
> gr-audio-oss
> gr-audio-osx
> gr-audio-portaudio
> gr-audio-windows
> gr-atsc
> gr-comedi
> gr-cvsd-vocoder
> gr-gpio
> gr-gsm-fr-vocoder
> gr-pager
> gr-radar-mono
> gr-radio-astronomy
> gr-trellis
> gr-video-sdl
> gr-wxgui
> gr-qtgui
> gr-sounder
> gr-utils
> gnuradio-examples
> grc
> 
> These components will not be built.
> 
> 
> 
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> 
> 

-- 
View this message in context: 
http://www.nabble.com/Problem-in-Installing-gnuradio-3.2-tp22518659p24341051.html
Sent from the GnuRadio mailing list archive at Nabble.com.