[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] GRC control of GPIO pins
From: |
HR Myler |
Subject: |
Re: [Discuss-gnuradio] GRC control of GPIO pins |
Date: |
Wed, 16 Jun 2010 13:43:40 -0500 |
On Jun 16, 2010, at Wednesday|June 16, 2010|1:07 PM, Josh Blum wrote:
Anyway, can the GRC program access the GPIO bits of the
daughtercards? I
didn't see anything in the list of available elements. I am
guessing it
just is not there, but the alternative would be to build the radio
with
GRC and then just edit into the source that it builds. Any tidbits
there
would be welcome.
rule of thumb: Dont edit the generated code.
Rather, make a custom block that suits your needs and add it to grc.
http://gnuradio.org/redmine/wiki/gnuradio/GNURadioCompanion#Adding-Custom-Blocks
-Josh
_______________________________________________
Is there a repository of custom blocks that others have created?
CONFIDENTIALITY: Any information contained in this e-mail (including
attachments) is the property of The State of Texas and unauthorized disclosure
or use is prohibited. Sending, receiving or forwarding of confidential,
proprietary and privileged information is prohibited under Lamar Policy. If you
received this e-mail in error, please notify the sender and delete this e-mail
from your system.