discuss-gnuradio
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
[Discuss-gnuradio] cant create two rx
From
:
John Wu
Subject
:
[Discuss-gnuradio] cant create two rx
Date
:
Thu, 15 Jul 2010 11:03:41 +0800
Hi all, I need to use two rx in my project, however I can not create two rx. My code create rx is bellow:
Rx1 = usrp_standard_rx_sptr(usrp_standard_rx::make(0,decimRate,1,-1,
usrp_standard_rx::FPGA_MODE_NORMAL,
1024,16*8,rbf));
Rx2 = usrp_standard_rx_sptr(usrp_standard_rx::make(0,decimRate,1,-1,
usrp_standard_rx::FPGA_MODE_NORMAL,
1024,16*8,rbf));
the error:
usrp_open_interface:usb_claim_interface: failed interface 2
could not claim interface 2: Device or resource busy
usrp_basic_rx: can't open rx interface
reply via email to
[Prev in Thread]
Current Thread
[
Next in Thread
]
[Discuss-gnuradio] cant create two rx
,
John Wu
<=
Re: [Discuss-gnuradio] cant create two rx
,
Josh Blum
,
2010/07/14
Prev by Date:
Re: [Discuss-gnuradio] USRP2 and DBSRx
Next by Date:
Re: [Discuss-gnuradio] cant create two rx
Previous by thread:
[Discuss-gnuradio] usrp_fft.py axis values and units
Next by thread:
Re: [Discuss-gnuradio] cant create two rx
Index(es):
Date
Thread