[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] question about xcvr2450
From: |
Jason Abele |
Subject: |
Re: [Discuss-gnuradio] question about xcvr2450 |
Date: |
Mon, 26 Jul 2010 11:16:20 -0700 |
On Fri, Jul 23, 2010 at 6:52 PM, rui qian <address@hidden> wrote:
> Hi all,
> I want to use tunnel.py with usrp1+xcvr2450 to create a network
> interface, and I set the frequent to 5.0G.
> The tx is ok, but it can't receive anything.
> I google the reason about it, someone say that the gnuradio_r10853
> can fix the question. However, I can't get the trunk version of 10853.
> I use some trunks of gnuradio( gnuradio-3.1.1 gnuradio-3.2.2
> gnuradio-3.3.0) to test it, it still can't receiving.
> What should I do to use xcvr2450.
> Thank you very much!
>
The xcvr2450 will work happily with gnuradio 3.2.2 and 3.3.0 (probably
earlier versions and definitely the latest git master)
Have you tried usrp_fft.py? Use a command like:
usrp_fft.py -d 16 -f 5.0GHz -R A
Have you tried it on both sides of your USRP? (change "-R A" to "-R B")
Have you tried more than just the 5.0GHz frequency? Try something in
the 2.4GHz band
Did you try both antenna ports?
Try using a Signal Generator to inject a sinusoid at 5.001GHz and
-40dBm. Can you see the sinusoid in your usrp_fft.py window?
Jason