[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] No response when using self-compiled FPGA code
From: |
Matthias Schäfer |
Subject: |
[Discuss-gnuradio] No response when using self-compiled FPGA code |
Date: |
Wed, 01 Sep 2010 15:00:42 +0200 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.7) Gecko/20100728 Thunderbird/3.1.1 |
Hi List,
I compiled the newest fpga code from the uhd-repository (u2_rev3) with
Xilinx' ISE 12.2. I also used the newest firmware which is available
online (20100901) and also tried some other versions but the USRP2 does
not send a response to arp requests or icmp ping messages. So
uhd_usrp_probe and uhd_find_devices does not work anymore. Is there a
known issue on using self-compiled fpga binaries? Do I need any
arguments to make? I just compiled the code by running make and it
finished successfully and generated the u2_rev3.bin.
Some more informations:
Firmware starts normally and receives ethernet arp packets (debugged via
serial port -> eth_pkt_inspector becomes called when the arp package is
received).
The HW seems to be ok because the uhd images from ettus' website work
fine for me.
Cheers,
Matthias
- [Discuss-gnuradio] No response when using self-compiled FPGA code,
Matthias Schäfer <=