[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] About synchronize two USRP2s using external reference
From: |
Wakisaka Youhei |
Subject: |
[Discuss-gnuradio] About synchronize two USRP2s using external reference (SMA) |
Date: |
Fri, 1 Oct 2010 10:12:33 +0900 |
I tried to synchronize two USRP2s using external reference (SMA).
I input 10-MHz signal to REFCLOCK pin and a trigger in PPS IN.
I modified rx_streaming_samples.cc and wrote the following code
u2->config_mimo(usrp2::MC_WE_LOCK_TO_SMA);
I use txrx_raw_eth_20100608.bin and u2_rev3-20100603.bin.
but I failed to synchronize two USRP2s.
I synchronized start timing using PPS but two USRP2's signal
have phase difference. This phase difference change every observation.
Some figures are attached.
In this case, I input RF signals of 130 MHz + 0.05 MHz to RF1 and set as
follows:
Center frequency: 130 MHz
Decimation: 4
When I don't set center frequency, two USRP2's signal don't have phase
difference.
So I suppose this is due to the phase difference between NCOs of two USRP2.
What should I do?
Many Thanks.
Youhei Wakisaka.
Observation_data.png
Description: PNG image
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] About synchronize two USRP2s using external reference (SMA),
Wakisaka Youhei <=