Unfortunately that doesn't work, I tried doing that with a TI board,
DM6446, it had 100M Ether and I used a GigE switch so I ended up
using a regular USRP. You can detect the USRP2 using the provided
script but you won't be able to receive radio samples. If memory
serves correctly, there are some GigE specific throtteling packets
that the USRP2 sends out that 100M Ethernet can't understand.
al
-----Original Message----- From: Josh Blum<address@hidden> To:
address@hidden Sent: Wed, Oct 13, 2010 12:06 pm Subject:
Re: [Discuss-gnuradio] Can USRP2 connect to Beagle Board-Xm?
I head that you can use a gigE switch between usrp2 and 100M
Ethernet. Then it may work. -Josh
On 10/13/2010 07:35 AM, Zhen wrote:
Hello,
I want to know if GNU Radio USRP2 can connect to Beagle Board- Xm
I know Beagle-board can connect to USRP by USB connection. Now
BeagleBoard-XM has 100M Ethernet, and USPP2 uses 1000M Ethernet,
can they work together?
Thanks
Zhen
_______________________________________________ Discuss-gnuradio
mailing list address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio
mailing list address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio
mailing list address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio