discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] UHD: cannot find usrp2.


From: Sangho Oh
Subject: [Discuss-gnuradio] UHD: cannot find usrp2.
Date: Fri, 17 Dec 2010 17:55:17 -0500

uhd_find_devices -->

linux; GNU C++ version 4.4.1; Boost_103800; UHD_0001.20101216232717.a78a72f
No UHD Devices Found

------------------------------------------
1. Used the latest UHD code by git pull

2. Used the latest firmware in 
http://www.ettus.com/downloads/uhd_images/UHD-images-most-recent/

3. Prepared SD using
sudo ./u2_flash_tool --dev=/dev/sdc -t s/w         usrp2_fw.bin         -w
sudo ./u2_flash_tool --dev=/dev/sdc -t fpga         usrp2_fpga.bin         -w

4. Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0
10.13.0.0       0.0.0.0         255.255.0.0     U     0      0        0 eth1
0.0.0.0         10.13.0.1       0.0.0.0         UG    100    0        0 eth1

5. ping is working nice.

# ping 192.168.10.2
PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
64 bytes from 192.168.10.2: icmp_seq=1 ttl=32 time=3.31 ms
64 bytes from 192.168.10.2: icmp_seq=2 ttl=32 time=0.073 ms
64 bytes from 192.168.10.2: icmp_seq=3 ttl=32 time=0.043 ms
64 bytes from 192.168.10.2: icmp_seq=4 ttl=32 time=0.063 ms


Any idea??
-- 
From: Sangho Oh


reply via email to

[Prev in Thread] Current Thread [Next in Thread]