[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] daughterboard performance
From: |
Guanbo Zheng |
Subject: |
Re: [Discuss-gnuradio] daughterboard performance |
Date: |
Fri, 18 Feb 2011 08:38:02 -0600 |
It is USRP2, my system setup is Ubuntu 9.04+Gnuradio3.2.2.
My test codes includes the benchmark OFDM, BBN code, which i tested smoothly
before both cabling and over the air.
TX uses XCVR2450, the RX uses RFX2400 or DBSRX-LF.
Best,
Guanbo
On Feb 17, 2011, at 10:42 PM, "Marcus D. Leech" <address@hidden> wrote:
>> Hi
>>
>> I used XCVR2450 daughterboard for TX and RX on USRP2 and everything is
>> fine.
>> Recently I began to use RFX2400 and DBSRX-LF, which I found out the
>> performance are much worse than XCVR2450.
>> Observed from FFT plot, I found out there are some weird spectrum
>> response using RFX2400 and DBSRX-LF respectively.
>> Furthermore, I am not able to decode some OFDM example anymore! (I
>> compensated the correct carrier frequency already)
>>
>> I am wondering if I need to update something like firmware, in order
>> to use those two new daughterboards.
>> Thanks,
> You haven't given us much to go on.
>
> What does your test setup look like? Are you using USRP1? USRP2?
> USRP-N210? Using UHD?
>
> Are you tests over-the-air or with cables? Are you using attenuators in
> the cabling?
>
>
>
>
> --
> Principal Investigator
> Shirleys Bay Radio Astronomy Consortium
> http://www.sbrac.org
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio