[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] How to decode the convolutional code in the GRC
From: |
Ben Reynwar |
Subject: |
Re: [Discuss-gnuradio] How to decode the convolutional code in the GRC |
Date: |
Thu, 10 Mar 2011 22:33:36 -0700 |
You probably want to use the trellis_viterbi_combined block.
The documentation for the trellis blocks is in
gnuradio/gr-trellis/doc/gr-trellis.xml.
(if you have xmlto installed then an html file is also built.)
Ben
2011/3/10 intermilan <address@hidden>:
> Hi all:
> Now I want to use the Trellis_encoder block in the GRC to make an
> example for the convolutional code.In my opinion, I use Trellis_encoder to
> produce the convolutional code, then make the convolutional code through
> the modulator and demodulator(such as DPSK), finally use some block to
> decode the convolutional code to get the original data.But after the data
> get out the demodulator,I do not know how to decode it.
> Here is the flow graph I used:
>
> vector_source->throttle->Packed_to_Unpacked->Trellis_encoder->Packet_encoder->DPSK_mod->DPSK_demod->Packet_decoder->?
> Can anyone tell me which block I should use after the Packet_decoder to
> decode the convolutional code?
>
>
> Thank you in advance.
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>