[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Possible WBX Board Failure
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] Possible WBX Board Failure |
Date: |
Fri, 11 Mar 2011 08:56:35 -0800 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.14) Gecko/20110223 Lightning/1.0b2 Thunderbird/3.1.8 |
> Also, here is the output of uhd_usrp_probe
>
> $ sudo uhd_usrp_probe --args="addr=192.168.10.2"
> linux; GNU C++ version 4.4.5; Boost_104000; UHD_002.20110126204618.b83454d
>
> Current recv sock buff size: 50000000 bytes
> mboard0 MIMO master
>
> Warning:
> Unknown transceiver board ID combination...
> RX dboard ID: WBX (0x0053)
> TX dboard ID: Unknown (0xffff)
The wrong ID is being read from the eeprom. Usually, this is an issue
with mounting. On the off chance that the eeprom got
corrupted/blanked/shocked, you can manually burn an ID in with the
following tool:
cd <prefix>/share/uhd/utils
./usrp_burn_db_eeprom --id=0x0052 --unit=TX
See if that helps,
-Josh