Re: [Discuss-gnuradio] Error building gnuradio on USRP E100

[Ingmar Meins]

Pays to pay attention doesn't it.... I forgot to run the opkg remove 
commands first.

This removed the problem below but still left the make crashing when 
trying to find /usr/include/uhd/config.hpp
I fixed this by copying this file and the other directories from my uhd 
(git) directory.

Weird but it works.


On 21/03/2011 5:48 PM, Ingmar Meins wrote:
> In response to Josh's announcement I have grabbed the latest git of 
> UHD and GNURADIO and tried to build it on my E100. I followed the 
> instructions from the usrpe1xx-FAQ.
>
> UHD built and installed okay but GNURADIO fails with the following 
> errors:
>
> Is this a case of the UHD from 
> git://ettus.sourcerepo.com/ettus/uhd.git not actually being the 
> correct version for the gnuradio from git://gnuradio.org/gnuradio.git ?
>
> Suggestions appreciated, especially since rebuilding takes most of the 
> evening!
>
> Cheers,
> Ingmar
>
> python/uhd_swig.cc: In function 'PyObject* 
> _wrap_dboard_iface_write_gpio(PyObject*, PyObject*, PyObject*)':
> python/uhd_swig.cc:18281:15: error: 'class uhd::usrp::dboard_iface' 
> has no member named 'write_gpio'
> python/uhd_swig.cc: In function 'PyObject* 
> _wrap_dboard_iface_sptr_write_gpio(PyObject*, PyObject*, PyObject*)':
> python/uhd_swig.cc:19732:16: error: 'class uhd::usrp::dboard_iface' 
> has no member named 'write_gpio'
> python/uhd_swig.cc: In function 'PyObject* 
> _wrap_uhd_usrp_source_sptr_get_freq_range(PyObject*, PyObject*, 
> PyObject*)':
> python/uhd_swig.cc:20891:26: error: 'uhd::meta_range_t' is not a template
> python/uhd_swig.cc: In function 'PyObject* 
> _wrap_uhd_usrp_source_sptr_get_gain_range(PyObject*, PyObject*, 
> PyObject*)':
> python/uhd_swig.cc:21040:26: error: 'uhd::meta_range_t' is not a template
> python/uhd_swig.cc: In function 'PyObject* 
> _wrap_uhd_usrp_sink_sptr_get_freq_range(PyObject*, PyObject*, 
> PyObject*)':
> python/uhd_swig.cc:23150:26: error: 'uhd::meta_range_t' is not a template
> python/uhd_swig.cc: In function 'PyObject* 
> _wrap_uhd_usrp_sink_sptr_get_gain_range(PyObject*, PyObject*, 
> PyObject*)':
> python/uhd_swig.cc:23299:26: error: 'uhd::meta_range_t' is not a template
> python/uhd_swig.cc: In function 'void init_uhd_swig()':
> python/uhd_swig.cc:26457:89: error: 'REF_MIMO' is not a member of 
> 'uhd::clock_config_t'
> python/uhd_swig.cc:26460:89: error: 'PPS_MIMO' is not a member of 
> 'uhd::clock_config_t'
> make[5]: *** [_uhd_swig_la-uhd_swig.lo] Error 1
> make[5]: Leaving directory `/media/sda7/gnuradio/gnuradio/gr-uhd/swig'
> make[4]: *** [all] Error 2
> make[4]: Leaving directory `/media/sda7/gnuradio/gnuradio/gr-uhd/swig'
> make[3]: *** [all-recursive] Error 1
> make[3]: Leaving directory `/media/sda7/gnuradio/gnuradio/gr-uhd'
> make[2]: *** [all] Error 2
> make[2]: Leaving directory `/media/sda7/gnuradio/gnuradio/gr-uhd'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/media/sda7/gnuradio/gnuradio'
> make: *** [all] Error 2
> address@hidden:/media/sda7/gnuradio/gnuradio#
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio