Re: [Discuss-gnuradio] USRP2 - external clock pps python example

[Burak TUYSUZ]

Hi Josh,
Is it possible to trigger storing data with pps using GRC I could nor
find a related email.
If so should that be included in FPGA or in software. A related work
would be great
Thanks in advance.
-Burak


On Mon, Apr 11, 2011 at 9:43 PM, Josh Blum <address@hidden> wrote:
>
>
> On 04/11/2011 02:35 PM, Burak TUYSUZ wrote:
>> Is there any example python code showing the usage of external clock
>> and pps inputs of USRP2
>> Thank you in advance
>> -Burak
>>
>
> A good python example would be code generated by grc when you setup the
> "ref clock" and "sync" parameters in the uhd usrp source/sink blocks.
>
> http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Gnuradio-UHD
>
> -Josh
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>



-- 
Burak TUYSUZ
Ph.D. Candidate, Research Assistant
The Pennsylvania State University
Electrical Engineering
329 Electrical Engineering East Building
University Park, PA 16802

**********CONFIDENTIAL**********
This e-mail message and any included attachments are confidential,
intended only or the recipient named above, and may contain
information that is privileged and exempt from disclosure under
applicable law.  If you have received this message in error, or are
not the named recipient, please immediately notify the sender by
return e-mail and delete all copies of this message.