[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] How to simulate USRP board?
From: |
Ed Criscuolo |
Subject: |
Re: [Discuss-gnuradio] How to simulate USRP board? |
Date: |
Thu, 8 Mar 2012 11:20:50 -0500 |
User-agent: |
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.22) Gecko/20110902 Thunderbird/3.1.14 |
More specifically, on the receive side, you can use a file source
for samples that have either been captured by someone else, or
generated by something like Matlab. On the transmit side, you can
simply sink any generated samples into a spectrum display.
Since you will not have any hardware in the simulation to provide
a real-time "pacing", you will need to add a throttle block
(only one!) to each flowgraph to keep it from consuming all
cpu cycles.
@(^.^)@ Ed
On 3/8/12 11:09 AM, Nick Foster wrote:
On Thu, Mar 8, 2012 at 4:41 AM, ketlin Pedron <address@hidden
<mailto:address@hidden>> wrote:
My name is Ketlin and I'm from Brazil. I am researching the
technology of cognitive radio, I'm not USRP board, I wonder if there
is any way to simulate the plate without the USRP hardware?
Gnuradio works fine without a USRP. You only need a USRP if you are
planning on transmitting or receiving real signals.
--n
_______________________________________________
Discuss-gnuradio mailing list
address@hidden <mailto:address@hidden>
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio