Re: [Discuss-gnuradio] Use USRP1 and USRP N200 at the same time

[mleech]

Conversion to UHD should be too hard. You generally don't have to touch the "guts", just the source/sink blocks.

-Marcus

 

On Fri, 23 Mar 2012 15:29:26 +0100, Noé Beuret wrote:

Hi Marcus,

 

Thanks for your response.

 

If I would use an old version of GNURadio it’s because a software that I need use it with USRP1. I’m afraid that this software doesn’t work if I use a newest gnuradio version or UHD.

 

Noé

 

 

De : address@hidden [mailto:address@hidden De la part de address@hidden
Envoyé : vendredi 23 mars 2012 15:04
À : address@hidden
Objet : Re: [Discuss-gnuradio] Use USRP1 and USRP N200 at the same time

 

USRP1 works just fine with the very-latest Gnu Radio and UHD just fine--I ran one that way just the other night.  So you can run build-gnuradio to download the very latest UHD and Gnu Radio and it'll work just fine with both your N210 and your USRP1.

There's absolutely no reason for a new user such as yourself to use any of the "classic" API for USRP1.  Just use UHD for everything.

Yes, you should be able to use two uhd_fft.py -- one setup to talk to your N210 and the other setup to talk to your USRP1, that should work just fine.

-Marcus

 

On Fri, 23 Mar 2012 14:38:55 +0100, Noé Beuret wrote:

Hi!

Thanks a lot for your response.

Last week I tried to install the latest version of GNURadio and UHD with the script provided by Marcus Leech, but I read somewhere that GNURadio version need to be between 3.3 and 3.5 for working with USRP1 because newer version don't use libusrp...  It is right?

And it's not a problem to use both USRPs at the same time without conflict? For trying, it is possible to run uhd_fft.py and usrp_fft.py together?

Thanks ;-)

Noé

-----Message d'origine-----

De : address@hidden [mailto:address@hidden] De la part de Martin Braun

Envoyé : vendredi 23 mars 2012 14:25

À : address@hidden

Objet : Re: [Discuss-gnuradio] Use USRP1 and USRP N200 at the same time

On Fri, Mar 23, 2012 at 01:51:00PM +0100, Noé Beuret wrote:

Hi everyone,

I’m a student in a telecommunication school and I need to use GNURadio 

for a project.

Cool, good luck!

I have two USRP : 1 USRP1 (USB interface) and 1 USRP N200 (ethernet interface).

The USRP1 works with a software that use GNURadio 3.2.2.

...it also works with a current version (unless you've done something super funky to it).

Now, I need to develop an other software with the USRPN200. This 

software need to run on the same computer, at same time that the first software.

What GNURadio and UHD version I need? It is possible to keep GNURadio 

3.2.2, install UHD and use both USRPs at the same time without conflict?

3.2.2 is ancient. Unless you have a really, really good reason, don't use it. Grab the newest version of both UHD and GNU Radio and *then* start your project.

MB

--

Karlsruhe Institute of Technology (KIT)

Communications Engineering Lab (CEL)

Dipl.-Ing. Martin Braun

Research Associate

Kaiserstraße 12

Building 05.01

76131 Karlsruhe

Phone: +49 721 608-43790

Fax: +49 721 608-46071

www.cel.kit.edu

KIT -- University of the State of Baden-Württemberg and National Laboratory of the Helmholtz Association

_______________________________________________

Discuss-gnuradio mailing list

address@hidden

https://lists.gnu.org/mailman/listinfo/discuss-gnuradio