|
From: | Jamie Wo |
Subject: | Re: [Discuss-gnuradio] Transmit and receive suing GMSK |
Date: | Thu, 26 Apr 2012 14:18:08 +1000 |
Try increasing the sampling rate (to 1M). We were doing something similar, and in our case, it helped.
On Wed, Apr 25, 2012 at 1:41 PM, Jamie Wo <address@hidden> wrote:
_______________________________________________Hi all,I am currently working on tranmiting and receiving data using 2 USRPN210s. I got some ideas from here and did this task using GMSK in GRC.The transmit side: File source --> Packet encoder --> GMSK Mod --> UHD sink.The receiver side: UHD source --> GMSK Demod --> Packet decoder --> File sink.Data in file source can be received by the receiver. However, I am not sure whether the data has been received correctly. Does anyone know how to test it ?My method is to use wav source and audio sink like this:The transmit side: Wav source --> Packet encoder --> GMSK Mod --> UHD sink.The receiver side: UHD source --> GMSK Demod --> Packet decoder --> Audio sink. (samp_rate 48K).I think if the sound received on the receiver is the same as the wav file, the data may be correctly received. However, after I tried this, the sound received was disjointedly, not as smooth as the wav source, and "audio underrun" happened sometimes.However, when I put all the blocks in one flow graph without UHD like this:wav source --> Packet encoder --> GMSK Mod --> GMSK Demod --> packet decoder --> audio sink.(samp_rate 48K), it works very well.Does anyone meet the same problem or know how to solve it? Is my way to test how to receive correctly right?To do what I want, is there any other blocks that need to be added in the GRC?Please give me some guidance.Thanks in advance.Jamie
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
--
Huzaifa Zafar
[Prev in Thread] | Current Thread | [Next in Thread] |