Re: [Discuss-gnuradio] Cannot ping the usrp2

[umer.rabbani]

Hello 
I want to know the IP address of USRP2. My problem is I want to use usrp2 
device with Matlab Simulink for that I need to know the Ip of the USRP and be 
sure about it. 
I used usrp2_recovery --ifc=eth0 --new-ip=192.168.10.2
And it says the Ip has been changed. Is there a method from which I can verify 
that the IP address has been changed.

Regards, 
Umer Rabbani | Researcher

Polaris House, PP129 B29, Adastral Park, Ipswich, UK
Postal Code IP5 3RE
01473645887|  - 0743 57 67 821


-----Original Message-----
From: address@hidden [mailto:address@hidden On Behalf Of Josh Blum
Sent: 31 May 2012 19:23
To: address@hidden
Subject: Re: [Discuss-gnuradio] Cannot ping the usrp2



On 05/31/2012 09:11 AM, Martin Braun wrote:
> On Thu, May 31, 2012 at 05:01:56PM +0100, address@hidden wrote:
>> I am using USRP2 device my device works fine with GNU radio. 
> 
> Hm, so what exactly is your problem?
> 
>> O.S=Ubuntu 10.04
>> Ip settings 192.168.10.1 netmask 255.255.255.0
>>
>> I tested the firewall is disabled by using address@hidden:~/Downloads$ 
>> sudo ufw status
>> Status: inactive
>>
>> I want to ping the ip address 192.168.10.2 but the response is unreachable.
> 
> I don't think you *can* ping USRP2s.
> 

Yea the fw for the old libusrp2 drivers didnt have ping.

But its fine on UHD :-)

Start here to get the driver and images:
http://code.ettus.com/redmine/ettus/projects/uhd/wiki

And the SD card instructions:
http://files.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-sd-card-usrp2-only

-josh

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio