Re: [Discuss-gnuradio] spectrum analyzer usrp2+rfx900

[turbovectorz turbovectorz]

Julio,

Usually, the frequency band is used by 800 MHz  trunking radio. So, I
presume you are scanning for GSM 850 and iDEN 800?
If that's the case, you will be able to detect the different type of
modulations, GMSK and M16QAM.
If you know the specifications, you will be able to decode it.

Jose M.

On Wed, Jun 27, 2012 at 10:46 AM, Julio Hector Aguilar Renteria
<address@hidden> wrote:
> Hi, is a signal un the frecuence band cell, I but use only usrp2 with
> daurherboard rfx900 and antenna between 800 and 900 mhz
>
> Sent from my Windows Phone
> From: turbovectorz turbovectorz
> Sent: 27/06/2012 12:28 p.m.
> To: Julio Hector Aguilar Renteria
> Cc: address@hidden
> Subject: Re: [Discuss-gnuradio] spectrum analyzer usrp2+rfx900
> Julio,
>
> The answer is YES, but also the signal quality depends on your RF
> front-end configuration such as antenna, amplifiers, etc.
>
> What kind of signals are you trying to detect and/or decode?
>
> Jose M.
>
> On Wed, Jun 27, 2012 at 8:26 AM, Julio Hector Aguilar Renteria
> <address@hidden> wrote:
>> I can to sweeping the frequency band from 800 Mhz to 1000 MHz with
>> usrp2+rfx900 (spectrum analyzer).
>>
>>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> address@hidden
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>