>
http://www.sbrac.org/files/build-gnuradio . I opened GRC and found some
> newer blocks (obviously because of some updates to the source) along with
> my previously missing blocks. So, everything is fine. Then I installed
> pre-cog using the set of commands at the end of the page:
>
https://github.com/buoyboy/pre-cog/wiki/Installation . After that I opened
> GRC and blocks that start with gr_*.xml are gone.
>
> Please let me know if I'm doing something wrong with the installation.
> Isn't pre-cog supposed to be installed in this way? Or if pre-cog is
> required, I have to install gnuradio in some other way apart from using
> that script?
>
> Thanks.
>
>
> On Wed, Oct 17, 2012 at 5:32 PM, Johnathan Corgan
> <
address@hidden>wrote:
>
>> On Wed, Oct 17, 2012 at 2:30 PM, Sakib Chowdhury <
address@hidden>wrote:
>>
>>
>>> I noticed that actually all block files (xml) are still there
>>> in /usr/local/share/gnuradio/grc/blocks/ . What GRC is not displaying are
>>> the blocks whose names start with gr_*.xml . I'll try to reinstall.
>>>
>>
>> This was a recently fixed bug on GNU Radio master branch, related to the
>> gr-blocks work Josh mentioned.
>>
>> Johnathan
>>
>>
>