[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] UHD Warning on ODD Interpolation
From: |
Marcus Leech |
Subject: |
Re: [Discuss-gnuradio] UHD Warning on ODD Interpolation |
Date: |
Thu, 1 Aug 2013 14:44:15 +0000 (UTC) |
How wide is your signal?
Then find the nearest sample rate > your_bandwidth that satisfies the desired outcome that the computed
interpolation rate (64.0e6 / desired_rate) is an even number.
If the signal has artefacts that "spill" outside the required sample rate, then, yet, filter it first.
on Aug 01, 2013,
embyte <address@hidden> wrote:
Hey Marcus, thanks for answering.
> (1) 720Khz is not an exact integer fraction of 64MHz (the sampling rate
> of the device)--so it rounded
>
> (2) It's warning you that you'll get a "humped" frequency response with
> more rolloff than you'd like, due to the rounded-down sample rate
> requiring an interpolation rate that is not divisible by two.
If I understood correctly, this it means that the transmitted signal
gets filtered more on the edges than expected?
Note that by setting a sampling rate of 720KHz, the transmission and
receiving work fine.
That is, can I fix the sampling rate warning and preserve the
transmitted signal by modifying the sampling rate (e.g. to 480KHz) and
by adding a band-pass filter before the USRP sink block?
Thanks for your insights. I appreciate.
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio