discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] Still problems building gr 3.4.2 / Debian


From: Ralph A. Schmid, dk5ras
Subject: Re: [Discuss-gnuradio] Still problems building gr 3.4.2 / Debian
Date: Sat, 3 Aug 2013 09:17:29 +0200

Hi,

Without gr-usrp everything builds and installs just fine - but when trying
to compile OpenBTS, I get the message "No package usrp found".

So I assume this one is needed...

Ralph.

> -----Original Message-----
> From: Tom Tsou [mailto:address@hidden
> Sent: Friday, 02 August, 2013 22:39
> To: Ralph A. Schmid, dk5ras
> Cc: address@hidden
> Subject: Re: [Discuss-gnuradio] Still problems building gr 3.4.2 / Debian
> 
> On Fri, Aug 2, 2013 at 10:19 PM, Ralph A. Schmid, dk5ras
<address@hidden>
> wrote:
> > OK, pulled fresh copy frokm git, no errors with bootstrap, but still
> > this
> > one:
> >
> > /usr/bin/ld: usrp_rx_cfile.o: undefined reference to symbol
> > '_ZN5boost6system15system_categoryEv'
> > /usr/bin/ld: note: '_ZN5boost6system15system_categoryEv' is defined in
> > DSO
> > /usr/lib/libboost_system.so.1.53.0 so try adding it to the linker
> > command line
> > /usr/lib/libboost_system.so.1.53.0: could not read symbols: Invalid
> > operation
> > collect2: error: ld returned 1 exit status
> > make[5]: *** [usrp_rx_cfile] Error 1
> > make[5]: Leaving directory `/home/ras/gnuradio-3.4.2/gr-usrp/apps'
> > make[4]: *** [all] Error 2
> > make[4]: Leaving directory `/home/ras/gnuradio-3.4.2/gr-usrp/apps'
> > make[3]: *** [all-recursive] Error 1
> > make[3]: Leaving directory `/home/ras/gnuradio-3.4.2/gr-usrp'
> > make[2]: *** [all] Error 2
> > make[2]: Leaving directory `/home/ras/gnuradio-3.4.2/gr-usrp'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/home/ras/gnuradio-3.4.2'
> > make: *** [all] Error 2
> > address@hidden:~/gnuradio-3.4.2$
> 
> If I'm not mistaken, that means the driver is built. Anyhow, the gr-usrp
> module isn't needed so you can add that to the disable list too
'--disable-gr-
> usrp'.
> 
> Or, since you *only* care about the usrp driver, just go into the 'usrp'
> subdirectory and run make and make install from there and ignore
> everything else.
> 
>  -TT




reply via email to

[Prev in Thread] Current Thread [Next in Thread]