Re: [Discuss-gnuradio] USRP Lan not detected

[thats_nice]

There is a process in which one should configure both the USRP N210 and your
PC in order to detect the new hardware (in this case, the USRP N210) - not
Plug and Play unfortunately.

First you should run the firmware.py (not sure where, but google it) once
the firmware is run, you should set ur IP to a static one: 192.168.10.1

The USRP N210 should be 192.168.10.2 you should ping to test:
                    /ping 192.168.10.2/ (in terminal)

I hope this helps.


Medhat Hamdy wrote
> Dear all, 
> 
>     I am using USRP N210 with a Lenovo Thinkpad labtop. When I connect 
> ethernet wire nothing happens (the leds on both the lab and the USRP do 
> not flash). And also the network gives me the message "Wired Network 
> Disconnected - you are now offline".
> 
> Can anyone help me.
> 
> 
>  
> Medhat Hamdy
> _______________________________________________
> Discuss-gnuradio mailing list

> Discuss-gnuradio@

> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio





--
View this message in context: 
http://gnuradio.4.n7.nabble.com/USRP-Lan-not-detected-tp43564p43779.html
Sent from the GnuRadio mailing list archive at Nabble.com.