Re: [Discuss-gnuradio] BladRF

[Ralph A. Schmid, dk5ras]

Yes, I had this problem. As far as I remember I uninstalled bladerf and gr-osmosdr, then manually deleted all remains of it and of hackrf (what I never used) from my system, compiled and installed again bladerf, compiled a fresh version of gr-osmosdr with the cmake-option not to build hackrf support, installed it, finally everything worked.

 

Ralph.

 

 

From: address@hidden [mailto:address@hidden On Behalf Of Muhammad JUNAID
Sent: Tuesday, October 22, 2013 3:02 PM
To: address@hidden
Cc: address@hidden
Subject: [Discuss-gnuradio] BladRF

 

I am working on bladeRF, dose anyone working on it and facing this error?

Ubuntu 13.04

linux; GNU C++ version 4.7.3; Boost_105300; UHD_003.005.004-140-gfb32ed16

 

<<< Welcome to GNU Radio Companion 3.7.1 >>>

 

i got this error while running osmocom_fft.

 

address@hidden:~/gnuradio/gr-osmosdr$ osmocom_fft -a bladerf=0,fpga=/opt/bladeRF/fpga/hostedx115.rbf -s 8000000 -f 446000000

linux; GNU C++ version 4.7.3; Boost_105300; UHD_003.005.004-140-gfb32ed16

 

gr-osmosdr v0.1.0-23-g6f4e16ff (0.1.1git) gnuradio 3.7.1

built-in source types: file fcd rtl rtl_tcp uhd hackrf 

 

FATAL: Failed to open HackRF device (-5) HACKRF_ERROR_NOT_FOUND

 

Trying to fill up 1 missing channel(s) with null source(s).

This is being done to prevent the application from crashing

due to a gnuradio bug. The maintainers have been informed.

 

Source has no sample rates (wrong device arguments?).

 

BLADERF CLI info

////////////////////////////////////////////////////////////////////////////////////////

bladeRF> load fpga /opt/bladeRF/fpga/hostedx115.rbf 

Loading fpga from /opt/bladeRF/fpga/hostedx115.rbf...

Done.

bladeRF> info

 

  Serial #:                 5cc7c3a07c529478308a9d5424965eb0

  VCTCXO DAC calibration:   0x99d1

  FPGA size:                115 KLE

  FPGA loaded:              yes

  USB bus:                  3

  USB address:              2

  Backend:                  libusb

  Instance:                 0

 

bladeRF> version

 

  bladeRF-cli version:        0.5.0-git-130cbba

  libbladeRF version:         0.6.2-git-130cbba

 

  Firmware version:           1.5.3-git-

  FPGA version:

 

GR-OSMOCOM enabled components 

 

-- 

-- ######################################################

-- # gr-osmosdr enabled components                         

-- ######################################################

--   * Python support

--   * Osmocom IQ Imbalance Correction

--   * FUNcube Dongle

--   * IQ File Source

--   * Osmocom RTLSDR

--   * RTLSDR TCP Client

--   * Ettus USRP Devices

--   * HackRF Jawbreaker

--   * nuand bladeRF

-- 

-- ######################################################

-- # gr-osmosdr disabled components                        

-- ######################################################

--   * sysmocom OsmoSDR

--   * FUNcube Dongle Pro+

--   * Osmocom MiriSDR

-- 

-- Building for version: v0.1.0-23-g6f4e16ff / 0.1.1git

-- Using install prefix: /opt/gnuradio-3.7.1git

-- Configuring done

-- Generating done

-- Build files have been written to: /home/junaid/gnuradio/gr-osmosdr

 

 

Regards

Muhammad Junaid