[Discuss-gnuradio] uhd_find_devices not detecting USRP2

[rmsrms1987]

Hi Everyone, 

I recently found a couple USRP2's  that have not been used for some time in
my lab, and decided to use them for some testing.  One of the USRP2's worked
perfectly when I connected it up to the host computer, but the other one is
giving me issues.  The uhd_find_devices is not able to detect this device. 
I tried debugging this issue by first swapping the SD card from the working
USRP2 to the faulty one, with no success.  I also tried reconfiguring the IP
address with the command: 

sudo ./usrp2_recovery.py --ifc=eth0 --new-ip=192.168.10.4

Both uhd_find_devices and uhd_usrp_probe --args "addr=192.168.10.4" still
did not work.  The LEDs  on both USRP2's light up the same exact way. I have
now run out of ideas of what to do.  Does anybody else possibly have a
solution to this problem?

Thank you very much in advance, 

Rob



--
View this message in context: 
http://gnuradio.4.n7.nabble.com/uhd-find-devices-not-detecting-USRP2-tp45284.html
Sent from the GnuRadio mailing list archive at Nabble.com.