[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid pytho
From: |
Marcus Müller |
Subject: |
Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ? |
Date: |
Sat, 08 Mar 2014 15:51:05 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.2.0 |
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Activecat,
sorry, I neither know your application nor what your work does, so the
question was more like "does GNU Radio do something wrong or is it
just the output of your block"; I don't understand any of your output ;)
- From what I see, there is 65535==0b1111111111111111 in your output;
this indicates some arithmetic error in your work.
However, this leaves the scope of this thread, so I suggest we close
the discussion here.
Greetings,
Marcus
On 08.03.2014 15:42, Activecat wrote:
> Dear Marcus,
>
>> Meanwhile, as you had advised, I had tried to see the parameters
>> that forecast() and general_work() are called with. Refer below
>> verbose message. When the flow chart started, the initial values
>> are samp_rate=32k, change_rate=64; hence d_iFactor = 32k/64 =
>> 500. At line 24 the samp_rate is changed to 64k on the fly by the
>> user. So now d_iFactor = 64k/64 = 1000. Every parameters and
>> return values seem to be correct, but the flow graph output
>> becomes wrong after line 24.
>
>> Wrong in which way?
>>
>
>
> Refer below, row_002 to row_010 are correct outputs. At row_011,
> the samp_rate was changed from 64k to 32k, by using WX GUI Slider.
> This were wrong outputs.
>
> Executing: "/home/sgku/gnuradio/flow_graphs/top_block.py" Using
> Volk machine: ssse3_32_orc Integer1 [row_001] = 3, 22,
> 33, 44, 55, 211, 222, 233, 244, 255, 0 Integer1
> [row_002] = 11, 22, 33, 44, 55, 211, 222, 233,
> 244, 255, 0 Integer1 [row_003] = 11, 22, 33, 44,
> 55, 211, 222, 233, 244, 255, 0 Integer1 [row_004] =
> 11, 22, 33, 44, 55, 211, 222, 233, 244, 255, 0
> Integer1 [row_005] = 11, 22, 33, 44, 55, 211,
> 222, 233, 244, 255, 0 Integer1 [row_006] = 11, 22,
> 33, 44, 55, 211, 222, 233, 244, 255, 0 Integer1
> [row_007] = 11, 22, 33, 44, 55, 211, 222, 233,
> 244, 255, 0 Integer1 [row_008] = 11, 22, 33, 44,
> 55, 211, 222, 233, 244, 255, 0 Integer1 [row_009] =
> 11, 22, 33, 44, 55, 211, 222, 233, 244, 255, 0
> Integer1 [row_010] = 11, 22, 33, 44, 55, 211,
> 222, 233, 244, 255, 0 Integer1 [row_011] = 11, 22,
> 33, 700, 23, 863, 15, 1530, 165, 0 Integer1 [row_012]
> = 65535, 3, 1, 3, 1646, 145, 73, 71, 124, 82,
> 85, 170, 173, 131, 184, 182, 145, 73, 71, 124,
> 82, 85, 170, 173, 131, 184, 182, 145, 73, 71,
> 124, 82, 85, 170, 173, 131, 184, 182, 145, 73,
> 71, 124, 82, 85, 170, 173, 131, 184, 182, 145,
> 73, 71, 124, 82, 85, 170, 173, 131, 184, 182,
> 145, 73, 71, 124, 82, 85, 170, 173, 131, 184,
> 182, 145, 73, 71, 124, 82, 85, 170, 173, 131,
> 184, 182, 145, 73, 71, 124, 82, 85, 170, 173,
> 131, 184, 182, 145, 73, 71, 124, 82, 85, 170,
> 173, 131, 184, 182, 145, 73, 71, 124, 82, 85,
> 170, 173, 131, 184, 182, 145, 73, 71, 124, 82,
> 85, 170, 173, 131, 184, 182, 145, 73, 71, 124,
> 82, 85, 170, 173, 131, 184, 182, 145, 73, 71,
> 124, 82, 85, 170, 173, 131, 184, 182, 145, 73,
> 71, 124, 82, 85, 170, 173, 131, 184, 182, 145,
> 73,
>>>> Done
>
>
>
> _______________________________________________ Discuss-gnuradio
> mailing list address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBAgAGBQJTGy5ZAAoJEBQ6EdjyzlHtdL8IAKtKp+4uw32Y975gbRV+Y+YO
GbC8Jeo8bWoHi3DdyjmlnzLaDCanhxXjNsfU0hwMQcpCQN65Zu0407VYfVYVIXgJ
IRBjOwSleZsTGBkeXS6lFxNQLHn5FkWIHMA8yPZy05jpjdqa6wdShRVmqjl8depe
kLxVPN8Cqfz8wadIV4OcW2l5K/59ZU/O2MqNNL2O5qiMNz8E8TDHmhJXfzCkWjcs
9JePXJ2RDS39o8W7WsPOlXLioNAHwBWy+98oNUClGB07dorkci8TWY6ScEWztKKU
9RJsUj9HUjy70LbXbRuJ88m1qZhBwNYDx4CGjX9PMJAMeM5ehnCQkNjRx3mFm20=
=u8XF
-----END PGP SIGNATURE-----
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, (continued)
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Activecat, 2014/03/07
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Marcus Müller, 2014/03/07
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Activecat, 2014/03/07
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Marcus Müller, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Marcus Müller, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Activecat, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Marcus Müller, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Activecat, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Marcus Müller, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Activecat, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?,
Marcus Müller <=
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Activecat, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Marcus Müller, 2014/03/08
- Re: [Discuss-gnuradio] self.set_min_noutput_items() is not a valid python command in gnuradio ?, Activecat, 2014/03/08