Re: [Discuss-gnuradio] Removing the old version and Installing gnuradio

2014-05-22 16:57 GMT+02:00 Philip Balister <address@hidden>:

On 05/22/2014 10:25 AM, Wafa Elhajhmida wrote:
> Hi,
>

> The USRP E 110 is connected to internet.
> In fact, I followed the different commands described in the FAQ. But when I
> typed
> "make" I got this error :
>
> [ 49%] Built target _filter_swig_swig_tag
> [ 49%] Building CXX object
> gr-filter/swig/CMakeFiles/_filter_swig.dir/filter_swigPYTHON_wrap.cxx.o
> g++: Internal error: Killed (program cc1plus)
> Please submit a full bug report.

> See <http://gcc.gnu.org/bugs.html<https://owa.ece.fr/owa/redir.aspx?C=azMLHeTJTEeJAp-eApYyqBPwd5wXLNEIaWtGtAFgTFNK5I8pwshWTvAb5Aa2cq8hkqcLKU7Jt-8.&URL="">>>

> for instructions.
> make[2]: ***
> [gr-filter/swig/CMakeFiles/_filter_swig.dir/filter_swigPYTHON_wrap.cxx.o]
> Error 1
> make[1]: *** [gr-filter/swig/CMakeFiles/_filter_swig.dir/all] Error 2
> make: *** [all] Error 2
>
>
>
> How to fix it in order to update gnuradio embedded on usrp e110?

You need to add a swapfile. There swig generated files take an enormous
amount of memory to compile.

Google should give guides on setting up a swapfile. here is one:

http://www.cyberciti.biz/faq/linux-add-a-swap-file-howto/

Philip

>
> Best regards,
>
> Wafa HAJ HMIDA
>
>
> 2014-05-19 16:06 GMT+02:00 Wafa Elhajhmida <address@hidden>:
>
>> I think I shall ask the network administrator to make the necessary
>> configurations so that the usrp e110 will be recognized by the network.
>>
>> Thanks for helping,
>>
>> Best regards,
>>
>> Wafa HAJ HMIDA
>>
>>
>> 2014-05-19 15:58 GMT+02:00 Wafa Elhajhmida <address@hidden>:
>>
>> I tried the different commands but the command opkg update still don't
>>> work.
>>>
>>>
>>>
>>> 2014-05-19 15:55 GMT+02:00 Wafa Elhajhmida <address@hidden>:
>>>
>>> the output is :
>>>>
>>>> ifup: interface eth0 already configured
>>>>
>>>>
>>>> 2014-05-19 15:39 GMT+02:00 Ettus Research Support <address@hidden>:
>>>>
>>>> I missed off the 'eth0' bit on the gateway setting:
>>>>>
>>>>> sudo route add default gw 192.168.1.1 eth0
>>>>>
>>>>>
>>>>> Mike
>>>>>
>>>>> --
>>>>> Mike Jameson M0MIK BSc MIET
>>>>> Ettus Research Technical Support
>>>>> Email: address@hidden
>>>>> Web: http://ettus.com
>>>>>
>>>>>
>>>>> On Mon, May 19, 2014 at 2:34 PM, Ettus Research Support <
>>>>> address@hidden> wrote:
>>>>>
>>>>>> On Ubuntu the alternative way to set an IP address of 192.168.1.234,
>>>>>> gateway of 192.168.1.1 and nameserver to 8.8.8.8 (google) is by doing the
>>>>>> following:
>>>>>>
>>>>>> sudo ifconfig eth0 up
>>>>>> sudo ifconfig eth0 192.168.1.234
>>>>>> sudo route add default gw 192.168.1.1
>>>>>> sudo echo "nameserver 8.8.8.8" > /etc/resolv.conf
>>>>>>
>>>>>> Mike
>>>>>>
>>>>>> --
>>>>>> Mike Jameson M0MIK BSc MIET
>>>>>> Ettus Research Technical Support
>>>>>> Email: address@hidden
>>>>>> Web: http://ettus.com
>>>>>>
>>>>>>
>>>>>> On Mon, May 19, 2014 at 2:14 PM, Marcus Müller <
>>>>>> address@hidden> wrote:
>>>>>>
>>>>>>> Hi Wafa,
>>>>>>> to download packages, you obviously need internet connectivity.
>>>>>>> You need to manage that; as gr-discuss, we really can't help you with
>>>>>>> that.
>>>>>>>
>>>>>>> Greetings,
>>>>>>> Marcus
>>>>>>>
>>>>>>> On 19.05.2014 15:13, Wafa Elhajhmida wrote:
>>>>>>>> I tried what you recommend me to do. But I got the same error, it
>>>>>>> isn't
>>>>>>>> able to download the files for update.
>>>>>>>> Is there any other alternative to fix this error ?
>>>>>>>>
>>>>>>>>
>>>>>>>> 2014-05-19 14:54 GMT+02:00 Ettus Research Support <
>>>>>>> address@hidden>:
>>>>>>>>
>>>>>>>>> You need an IP address.
>>>>>>>>>
>>>>>>>>> Try:
>>>>>>>>>
>>>>>>>>> sudo dhclient eth0
>>>>>>>>>
>>>>>>>>> Mike
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Mike Jameson M0MIK BSc MIET
>>>>>>>>> Ettus Research Technical Support
>>>>>>>>> Email: address@hidden
>>>>>>>>> Web: http://ettus.com
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mon, May 19, 2014 at 10:11 AM, Wafa Elhajhmida <
>>>>>>>>> address@hidden> wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> I connected the usrp e100 through an ethernet connection.
>>>>>>>>>>
>>>>>>>>>> And I obtained:
>>>>>>>>>>
>>>>>>>>>> address@hidden:~# ifconfig eth0eth0 Link encap:Ethernet
>>>>>>> HWaddr A0:36:FA:95:32:E9 inet6 addr:
>>>>>>> fe80::a236:faff:fe95:32e9/64 Scope:Link UP BROADCAST RUNNING
>>>>>>> MULTICAST MTU:1500 Metric:1 RX packets:334 errors:0 dropped:0
>>>>>>> overruns:0 frame:0 TX packets:52 errors:3 dropped:0 overruns:0
>>>>>>> carrier:0 collisions:0 txqueuelen:1000 RX bytes:22517
>>>>>>> (21.9 KiB) TX bytes:14498 (14.1 KiB) Interrupt:80
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> When I typed opkg update, I got this error.
>>>>>>>>>>
>>>>>>>>>> address@hidden:~# opkg update *
>>>>>>>>>>
>>>>>>>>>> *Downloading
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz<
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz
>>>>>>>> .*
>>>>>>>>>>
>>>>>>>>>> * Downloading
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz<
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz>.
>>>>>>> *
>>>>>>>>>>
>>>>>>>>>> *Downloading
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz<
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz
>>>>>>>> .*
>>>>>>>>>>
>>>>>>>>>> * Collected errors: *
>>>>>>>>>>
>>>>>>>>>> ** opkg_download: Failed to download
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz<
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/armv7a/Packages.gz>,
>>>>>>> wget returned 1. *
>>>>>>>>>>
>>>>>>>>>> * * opkg_download: Failed to download
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz<
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/all/Packages.gz>,
>>>>>>> wget returned 1. *
>>>>>>>>>>
>>>>>>>>>> ** opkg_download: Failed to download
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz<
>>>>>>> http://files.ettus.com/binaries/oe-classic-feeds/ipk/usrp-e1xx/Packages.gz>,
>>>>>>> wget returned 1.*
>>>>>>>>>>
>>>>>>>>>> Can you lead me how to fix this error.
>>>>>>>>>>
>>>>>>>>>> Thanks a lot,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Best regards,
>>>>>>>>>>
>>>>>>>>>> Wafa HAJ HMIDA
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2014-05-16 23:58 GMT+02:00 Philip Balister <address@hidden>:
>>>>>>>>>>
>>>>>>>>>> On 05/16/2014 10:28 AM, Wafa Elhajhmida wrote:
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> Thank you for your reply .
>>>>>>>>>>>>
>>>>>>>>>>>> How shall I proceed in order to update GR on E 1xx to GR 3.7 to
>>>>>>> obtain
>>>>>>>>>>> the
>>>>>>>>>>>> different blocks necessary
>>>>>>>>>>> Use:
>>>>>>>>>>>
>>>>>>>>>>> opkg update
>>>>>>>>>>> opkg upgrade
>>>>>>>>>>>
>>>>>>>>>>> to update the E100.
>>>>>>>>>>>
>>>>>>>>>>> This link should get you started installing gnuradio 3.7:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>> http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-do-I-install-GNU-Radio-from-source
>>>>>>>>>>>
>>>>>>>>>>>> to implement OFDM channel on USRP E 110 ?
>>>>>>>>>>> I will be easier getting OFDM going with a USRP (such as a B200)
>>>>>>>>>>> attached to a desktop computer first, then use this work to move
>>>>>>> it to
>>>>>>>>>>> the E100. The processor o the E100 is much slower, so it will be
>>>>>>> harder
>>>>>>>>>>> to work out what is your problem and what is a limitation of the
>>>>>>>>>>> hardware and software that needs work to improve.
>>>>>>>>>>>
>>>>>>>>>>> Philip
>>>>>>>>>>>
>>>>>>>>>>> Philip
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Wafa HAJ HMIDA
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2014-05-15 18:30 GMT+02:00 Marcus Leech <address@hidden
>>>>>>>> :
>>>>>>>>>>>>
>>>>>>>>>>>>> Phil:
>>>>>>>>>>>>>
>>>>>>>>>>>>> What is our current recommended procedure for updating GR on
>>>>>>> the E1xx
>>>>>>>>>>>>> series to GR3.7?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Thu, May 15, 2014 at 11:35 AM, Ettus Research Support <
>>>>>>>>>>>>> address@hidden> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> You can also look in:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://files.ettus.com/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Specifically the following link to some embedded files if
>>>>>>> they are
>>>>>>>>>>>>>> relevant:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> http://files.ettus.com/e1xx_images/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Mike
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Mike Jameson M0MIK BSc MIET
>>>>>>>>>>>>>> Ettus Research Technical Support
>>>>>>>>>>>>>> Email: address@hidden
>>>>>>>>>>>>>> Web: http://ettus.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Thu, May 15, 2014 at 4:33 PM, Mike Jameson <
>>>>>>>>>>> address@hidden>wrote:
>>>>>>>>>>>>>>> Wafa,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I've forwarded this to the address@hidden address for the
>>>>>>>>>>> Embedded
>>>>>>>>>>>>>>> experts to answer this for you. The files are giving me a
>>>>>>> 404 too
>>>>>>>>>>> so
>>>>>>>>>>>>>>> thanks for pointing this out.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Mike
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Mike Jameson M0MIK BSc MIET
>>>>>>>>>>>>>>> Ettus Research Technical Support
>>>>>>>>>>>>>>> Email: address@hidden
>>>>>>>>>>>>>>> Web: http://ettus.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Thu, May 15, 2014 at 3:26 PM, Wafa Elhajhmida <
>>>>>>>>>>>>>>> address@hidden> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> First, I tried to update the bootfiles of usrp e110. But
>>>>>>> these
>>>>>>>>>>> links
>>>>>>>>>>>>>>>> mentioned on Ettus website,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>> https://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/Updating_E1XX_Boot_Files_and_Kernel_Modules
>>>>>>>>>>>>>>>> -http://dl.dropbox.com/u/14618236/MLO
>>>>>>>>>>>>>>>> -http://dl.dropbox.com/u/14618236/u-boot.bin-for-2.6.38
>>>>>>>>>>>>>>>> -
>>>>>>> http://dl.dropbox.com/u/14618236/uImage-2.6.38-r0a-usrp-e1xx.bin
>>>>>>>>>>>>>>>> -
>>>>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>> http://dl.dropboxusercontent.com/u/14618236/modules-3.0-pm-r0d-usrp-e1xx.tgz
>>>>>>>>>>>>>>>> don't work.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Can you give me other links where can I find the different
>>>>>>> files
>>>>>>>>>>> MLO,
>>>>>>>>>>>>>>>> U-Boot, uImage. in order to make an up date of kernel and
>>>>>>> boot
>>>>>>>>>>> files.
>>>>>>>>>>>>>>>> Second, How can I access to gnuradio embedded on usrp e 110
>>>>>>> in
>>>>>>>>>>> order to
>>>>>>>>>>>>>>>> show it on my screen.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Wafa HAJ HMIDA
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 2014-05-13 14:28 GMT+02:00 Mike Jameson <
>>>>>>> address@hidden>:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> If you Google "USRP E100 update gnuradio" it points to the
>>>>>>>>>>> following
>>>>>>>>>>>>>>>>> instructions:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>> http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-do-I-install-GNU-Radio-from-source
>>>>>>>>>>>>>>>>> Mike
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Mike Jameson M0MIK BSc MIET
>>>>>>>>>>>>>>>>> Ettus Research Technical Support
>>>>>>>>>>>>>>>>> Email: address@hidden
>>>>>>>>>>>>>>>>> Web: http://ettus.com
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Tue, May 13, 2014 at 12:59 PM, Wafa Elhajhmida <
>>>>>>>>>>>>>>>>> address@hidden> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> plz how to proceed ?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks a lot
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> 2014-05-13 11:47 GMT+02:00 Wafa Elhajhmida <
>>>>>>>>>>>>>>>>>> address@hidden>:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>> I'm working on USRP E 110 card in order to implement OFDM
>>>>>>>>>>> channel on
>>>>>>>>>>>>>>>>>>> it.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> In fact, I would like to remove the old version of
>>>>>>> gnuradio
>>>>>>>>>>>>>>>>>>> installed in USRP E 110.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Then, I would like to install gnuradio 3.7.4 on USRP E
>>>>>>> 110(the
>>>>>>>>>>>>>>>>>>> version that as far as I know contains the different
>>>>>>> blocks
>>>>>>>>>>> necessary to
>>>>>>>>>>>>>>>>>>> implement
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> OFDM channel on USRP E 110).
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Best regards,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Wafa HAJ HMIDA
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> Discuss-gnuradio mailing list
>>>>>>>>>>>>>>>>>> address@hidden
>>>>>>>>>>>>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Marcus Leech
>>>>>>>>>>>>> Technical Support Assistant
>>>>>>>>>>>>> Ettus Research LLC
>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

From:	Wafa Elhajhmida
Subject:	Re: [Discuss-gnuradio] Removing the old version and Installing gnuradio 3.7 on USRP E 110
Date:	Fri, 23 May 2014 11:50:36 +0200