[Discuss-gnuradio] Fwd: Install UCLA-gr-802.15.4 into E100 has error

[Zongyi LIU]

---------- Forwarded message ----------
From: Zongyi LIU <address@hidden>
Date: 2014-08-06 17:30 GMT+02:00
Subject: Re: [Discuss-gnuradio] Install UCLA-gr-802.15.4 into E100 has error
To: Bastian Bloessl <address@hidden>

Hi Bastian,

I have read your paper "A GNURadio-based IEEE 802.15.4 Testbed". It's really an excellent job.
Your testbed implement from PHY layer up to network layer and run Contiki system. But, you implement them on N210 with a high performance.

So, I don't know whether it's possible to implement your code on E100? As you know, E100 use an embedded processor ARM Cortex-A8 with limited computational and process ability, it runs special Angstrom linux system.
I got some information from this paper "IEEE 802.15.4 Implementation on an Embedded Device", it mentions that they can't used UCLA-802.15.4 code to receive packet. The embedded processor is not fast enough to demodulate data. Finally, he redesign FPGA to pre-process some data before sending them to processor and receive package barely..
So, Hope for your suggestion and thank you again!

Best
Zongyi

2014-08-06 9:59 GMT+02:00 Bastian Bloessl <address@hidden>:

You could give this a try

https://github.com/bastibl/gr-ieee802-15-4

Best,
Bastian

On 05 Aug 2014, at 18:07, Tom Rondeau <address@hidden> wrote:

> On Tue, Aug 5, 2014 at 11:51 AM, Zongyi LIU <address@hidden> wrote:
> Hello everyone:
>
> Recently, I want to install UCLA-gr-ieee802.15.4 module into my USRP E100.
>
> When I was configuring it, UCLA-gr-ieee802.15.4 had some error. I modify the PATH as follow:
> //"C_INCLUDE_PATH=/usr/include/python2.6
> //export C_INCLUDE_PATH"
> Beside, I modify the Makefile.common as follow to fix it:
> //"# includes
> //grincludedir   = $(includedir)/gnuradio -I/usr/include/gnuradio
> //# swig includes
> //swigincludedir = $(grincludedir)/swig -I/usr/include/gnuradio/swig"
>
> But, after "./configure". there is a fatal error in "make"----:"ucla.cc:149:20: fatal error: Python.h: No such file or directory"
> //
> address@hidden:~/UCLA-gr-ieee802-15-4/gr-ieee802-15-4# make
> make  all-recursive
> make[1]: Entering directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4'
> Making all in config
> make[2]: Entering directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/config'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/config'
> Making all in src
> make[2]: Entering directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src'
> Making all in lib
> make[3]: Entering directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib'
> make  all-am
> make[4]: Entering directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib'
> /bin/bash ../../libtool --tag=CXX   --mode=compile g++ -DHAVE_CONFIG_H -I. -I../.. -I/usr/include/gnuradio    -I/usr/include/python2.6    -g -O2 -Wall -Woverloaded-virtual -pthread -MT ucla.lo -MD -MP -MF .deps/ucla.Tpo -c -o ucla.lo ucla.cc
> libtool: compile:  g++ -DHAVE_CONFIG_H -I. -I../.. -I/usr/include/gnuradio "-I/usr/include/python2.6" -g -O2 -Wall -Woverloaded-virtual -pthread -MT ucla.lo -MD -MP -MF .deps/ucla.Tpo -c ucla.cc  -fPIC -DPIC -o .libs/ucla.o
> ucla.cc:149:20: fatal error: Python.h: No such file or directory
> compilation terminated.
> make[4]: *** [ucla.lo] Error 1
> make[4]: Leaving directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib'
> make[3]: *** [all] Error 2
> make[3]: Leaving directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4'
> make: *** [all] Error 2
> //
> I searched on google, the solution is install python-dev, but E100 has python2.6 in facroty default.
> So, it really confuse me a lot.
> Thank you in advance!
>
> --
> Zongyi LIU
> Doctorant
> Institut de Recherche en Informatique de Toulouse (IRIT)
> Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9
> Email : address@hidden
>
> Just a word of caution: this is a very old project and not likely to work with the latest GNU Radio code.
>
> You're problem is indeed that you don't have the development package for Python installed. You have the normal, runtime package, but this doesn't include the development header files.
>
> Tom
>

> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

--
Dipl.-Inform. Bastian Bloessl
Distributed Embedded Systems Group
University of Paderborn, Germany
http://www.ccs-labs.org/~bloessl/

--

Zongyi LIU
Doctorant

Institut de Recherche en Informatique de Toulouse (IRIT)
Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9
Email : address@hidden

--

Zongyi LIU
Doctorant

Institut de Recherche en Informatique de Toulouse (IRIT)
Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9
Email : address@hidden