|
From: | Richard Bell |
Subject: | Re: [Discuss-gnuradio] Achievable Sampling Rate without Under/Overflows |
Date: | Fri, 27 Mar 2015 12:28:18 -0700 |
On 03/27/2015 01:01 PM, Richard Bell wrote:
The answer is, unfortunately, "it depends".RichThose who have working OFDM radios, what sample rates does your system support without over/underflow? How about those with QPSK radios detecting packets, what samle rate can you support?I need some understanding of what reasonably achievable sample rates are using GNU Radio to implement a packet base radio.For example, I'm running into D's at only 430 k/samples. This is running a packet detecting radio using bpsk.
I'm not using a multi-rate approach, so I know there are gains to be had in my design. But for a BPSK radio with packet detection (and full synchronization), I'm surprised I'm hitting the low limits of what the USRP requires already.
Thanks,
_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
For example, I'm running a very simple radio astronomy "flow" on an Odroid XU3 at 2 x 11.5Msps,without overruns (except occasionally).
What type of computer are you using? Have you made certain that any filters you have in your flow don't have horrendous filter lengths?
That's very often a cause of newcomers getting poor performance out of their signal flows. They specify a filter with far-too-aggressive
"skirts", which yields a filter that is 10 times longer than it really needs to be, for example.
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |