[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] The FPGA build is not compatible with the host code b
From: |
cczhengy |
Subject: |
[Discuss-gnuradio] The FPGA build is not compatible with the host code build |
Date: |
Tue, 14 Apr 2015 06:38:48 -0700 (MST) |
Hi all,
I'm a new user of GNURadio and USRP. I used the script "build-gnuradio" to
download the source and have installed them all.But when I tried the
"uhd_fft", the terminal showed as belows:
Linux; GNU C++ version 4.6.3; Boost_104800; UHD_003.008.002-168-gddae9468
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected FPGA compatibility number 11, but got 10:
The FPGA build is not compatible with the host code build.
Please run:
"/usr/local/lib/uhd/utils/uhd_images_downloader.py"
"/usr/local/lib/uhd/utils/usrp_n2xx_simple_net_burner" \
--addr="192.168.10.2"
I followed the instruction as above. However, the problem still exists. I
noticed that the images it downloaded is
"uhd-images_003.008.002-157-gbe03e694.zip",which seemed to be not compatible
with UHD_003.008.002-168-gddae9468.
Can anyone tell me how to figure it out ? which of the files on
http://files.ettus.com/binaries/images/ is number 11?
Thanks very much.
Yue
--
View this message in context:
http://gnuradio.4.n7.nabble.com/The-FPGA-build-is-not-compatible-with-the-host-code-build-tp53288.html
Sent from the GnuRadio mailing list archive at Nabble.com.
- [Discuss-gnuradio] The FPGA build is not compatible with the host code build,
cczhengy <=