discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Discuss-gnuradio] [USRP-users] The RF LO does not support the reque


From: Marcus Müller
Subject: Re: [Discuss-gnuradio] [USRP-users] The RF LO does not support the requested frequency
Date: Thu, 30 Jul 2015 08:01:54 +0200
User-agent: K-9 Mail for Android

Dear Nur Qalbi,

There's two issues that I'd like to address separately:

1. RF LO warning
2. Sampling rate warning.


1. Shouldn't really be a warning, because, as the output says, in the end tuning is successful. The reason you're seeing this is UHD being a little verbose about how it tuned. Don't worry, things should work as expected.

2. Is much much more severe: you seem to have modified the flow graph to run at 5GS/s. That does neither technologically, physically nor mathematically make much sense - did you perhaps intend to tune to 5GHz RF frequency?

Best regards,
Marcus

Am 30. Juli 2015 06:51:37 MESZ, schrieb nur qalbi via USRP-users <address@hidden>:
hi. i am using ubuntu 14.04 and i am trying run wifi_rx.grc.when i try
run this wifi_rx.grc it comes out with this:


Generating:
"/home/userr/Downloads/gr-ieee802-11-master/examples/wifi_rx.py"

Executing:
"/home/userr/Downloads/gr-ieee802-11-master/examples/wifi_rx.py"

linux; GNU C++ version 4.8.2; Boost_105500;
UHD_003.008.002-135-ga393ec83

Using Volk machine: avx_64_mmx
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes

UHD Warning:
    The hardware does not support the requested RX sample rate:
    Target sample rate: 5000.000000 MSps
    Actual sample rate: 50.000000 MSps
-- Tune Request: 2412.000000 MHz
--   The RF LO does not support the requested frequency:
--     Requested LO Frequency: 2412.000000 MHz
--     RF LO Result: 2411.999389 MHz
--   Attempted to use the DSP to reach the requested frequency:
--     Desired DSP Frequency: -0.000611 MHz
--     DSP Result: -0.000611 MHz
--   Successfully tuned to 2412.000000 MHz
--

UHD Warning:
    The total sum of rates (50.000000 MSps on 1 channels) exceeds the
maximum capacity of the connection.
    This can cause overflows (O).
O
>>> Done

what should i do. i hope you can help me.



USRP-users mailing list
address@hidden
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
reply via email to

[Prev in Thread] Current Thread [Next in Thread]