|
From: | Washbourne, Logan |
Subject: | Re: [Discuss-gnuradio] OOT block not showing in GRC |
Date: | Sat, 8 Aug 2015 17:56:42 -0500 |
Hi Logan:
I just went through the same process! My new OOT block wasn't being found. The solution is to add a [grc] segment to the config.conf file in ~/.gnuradio:
I had to create the .gnuradio directory, then add the simple two-line [grc] stanza to a new config.conf file:
[grc]
local_blocks_path=/usr/local/share/gnuradio/grc/blocks
This tells grc to look for additional blocks in the stated directory. So you would do something like:
cd
mkdir .gnuradio
cd .gnuradio
vi config.conf
Then add the two lines above, your OOT block install path may be different so I'd check it first.
Hope this helps,
Kevin
> On Aug 8, 2015, at 3:33 PM, Washbourne, Logan <address@hidden> wrote:
>
> Hello all,
>
> I am trying to create a simple OOT block. Eventually I would like to create a block that lets a transmitting agent know if their message was received or not, but for now I am just trying to create a block that multiplies the input values by 2 (very similar to the guided tutorial example of the square_ff block).
>
> So the problem is that when I follow all of the instructions no errors appear but when I open up the GRC, my module and blocks are not there.
>
> So hopefully no one minds if I explain how I have installed Gnuradio on my machine and the process of creating the OOT module, in hopes someone might find where I made an error.
>
> I have already gotten previous help and responses on here that really did help me out so I'd like to say again, thank you to the community.
>
> Ok, so I used Pybombs to install Gnuradio.
>
> /home/username/Thesis/pybombs is where I installed pybombs.
>
> Before installing gnuradio I changed the permissions to the path of /opt/gnuradio/pybombs by using: sudo chown username:mygroupname /opt/gnuradio/pybombs (thanks to Nathan West)
>
> I then used ./pybombs install gnuradio.
>
> I changed the install prefix to /opt/gnuradio/pybombs
>
> Then I used ./pybobms env
> source /opt/gnuradio/pybombs/setup_env.sh (sometimes I have to rerun this to get the GRC to open, not sure what I'm doing to undo this command)
>
> Then I created the folder, /home/username/Thesis/OOT
>
> I then used gr_modtool newmod ACK
>
> Then /home/username/Thesis/OOT/gr-ACK gr_modtool add -t general check
>
> altered the QA file
> rewrote the check_impl.cc file
>
> Created the build folder(/home/username/Thesis/OOT/gr-ACK/build
>
> ran cmake ../
> ran make
> ran make test
>
> Everything passed(after some debugging, array indices start at 0 btw)
>
> I then ran gr_modtool makexml check in the gr-ACK folder
>
> Then cd build
>
> sudo make install
> sudo ldconfig
>
> gnuradio-companion
>
> And I can't find my module or block.
>
> I have a feeling that I'm still installing gnuradio or my OOT blocks in the wrong places, but I'm not sure how to remedy it.
>
> *********check_impl.cc***********
>
> #ifdef HAVE_CONFIG_H
> #include "config.h"
> #endif
>
> #include <gnuradio/io_signature.h>
> #include "check_impl.h"
>
> namespace gr {
> namespace ACK {
>
> check::sptr
> check::make()
> {
> return gnuradio::get_initial_sptr
> (new check_impl());
> }
>
> /*
> * The private constructor
> */
> check_impl::check_impl()
> : gr::block("check",
> gr::io_signature::make(1,1, sizeof (float)),
> gr::io_signature::make(1,1, sizeof (float)))
> {}
>
> /*
> * Our virtual destructor.
> */
> check_impl::~check_impl()
> {
> }
>
> void
> check_impl::forecast (int noutput_items, gr_vector_int &ninput_items_required)
> {
> ninput_items_required[0] = noutput_items;
> }
>
> int
> check_impl::general_work (int noutput_items,
> gr_vector_int &ninput_items,
> gr_vector_const_void_star &input_items,
> gr_vector_void_star &output_items)
> {
> const float *in = (const float *) input_items[0];
> float *out = (float *) output_items[0];
>
> // Do <+signal processing+>
> // Tell runtime system how many input items we consumed on
> // each input stream.
>
> for(int i = 0; i < noutput_items ;i++)
> {
> out[i] = in[i] * 2;
> }
>
>
> consume_each (noutput_items);
>
> // Tell runtime system how many output items we produced.
> return noutput_items;
> }
>
> } /* namespace ACK */
> } /* namespace gr */
>
>
> ***********qa_check.py**********************
>
> #!/usr/bin/env python
>
>
> from gnuradio import gr, gr_unittest
> from gnuradio import blocks
> import ACK_swig as ACK
>
> class qa_check (gr_unittest.TestCase):
>
> def setUp (self):
> self.tb = gr.top_block ()
>
> def tearDown (self):
> self.tb = None
>
> def test_001_check (self):
>
> src_data = (3, 4, 5.5, 2, 3)
> expected_result = (6, 8, 11, 4, 6)
> src = ""> > sqr = ACK.check()
> dst = blocks.vector_sink_f()
> self.tb.connect(src,sqr)
> self.tb.connect(sqr,dst)
> self.tb.run()
> result_data = dst.data()
> self.assertFloatTuplesAlmostEqual(expected_result,result_data,6)
>
>
>
>
>
>
> if __name__ == '__main__':
> gr_unittest.run(qa_check, "qa_check.xml")
>
>
>
>
> I really appreciate all of your time,
>
> Logan Washbourne
> Electrical Engineering Graduate Student
> (Electromagnetics)
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |