|
From: | Julian Arnold |
Subject: | Re: [Discuss-gnuradio] No revision detected MB EEPROM must be reprogrammed! |
Date: | Tue, 11 Aug 2015 16:40:40 +0200 |
[Note: The reason I'm posting this here is because I'm not sure whether this is solely a UHD problem or perhaps because of some 'suboptimal' communication between GNURadio & UHD, and I've seen some earlier posts on this list resolving UHD-related issues.If this is off-topic and does not belong here, I apologize!]I've been working with GNURadio & UHD/USRP for quite some time now. All of a sudden I started seeing the following messages when running my flowgraph, on which I couldn't find any info:
Dear all,
UHD Warning:
No revision detected MB EEPROM must be reprogrammed!At the time I was using UHD 3.9. Anyhow, a colleague told me that he also used to have problems with too new versions of UHD, but that those disappeared as he started to use UHD 003.008.005. So I erased all traces of GNURadio & UHD and reinstalled from scratch using the build-gnuradio script, now specifying that I want UHD version 003.008.005 installed. Furthermore, I ran the usrp_x3xx_fpga_burner tool to rewrite the EEPROM of the X300. Now, when I wish to run my GNURadio flowgraph, I get the following return messages:
linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.008.005-0-g7efbd15b
-- X300 initialization sequence...
-- Determining maximum frame size... 8000 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
-- Setup RF frontend clocking...
UHD Warning:
No revision detected MB EEPROM must be reprogrammed!
UHD Warning:
Defaulting to X300 RevD Clock Settings. This will result in non-optimal lock times.
Traceback (most recent call last):
File "/home/matija/bin/phantom2_mod.py", line 270, in <module>
tb = phantom2_mod()
File "/home/matija/bin/phantom2_mod.py", line 92, in __init__
channels=range(1),
File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py", line 122, in constructor_interceptor
return old_constructor(*args)
File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py", line 2282, in make
return _uhd_swig.usrp_sink_make(*args)
RuntimeError: RuntimeError: Unsupported board revision number: 18446744073709382690.
The maximum board revision number supported in this version is 6.
Please update your UHD version.
>>> Done (return code 1)Did anyone else experience the same problems? Can I not use UHD 003.008.005 with the X300? I'm assuming that something weird happened during the installation as the board revision number is so odd..
I'm using an USRP X300 with a UBX-160 daughterboard, connected over 10Gb ethernet. Gnuradio version: 3.7.7.2. My system is 64bit Ubuntu 14.04.Any help is greatly appreciated!Kind regards,Mat
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |