Hi CDL!
Does the same error occur with the B200 powered with the external
power supply?
What USB controller are you using (if you're using linux,
"lscpi|grep -i usb" will tell you)?
Best regards,
Marcus
On 10.09.2015 04:04, Michael Dickens
wrote:
Please reply on-list for the best assistance; not to me or
any specific responder personally.
OK; so you're using a B200, and you're getting USB errors.
Have you tried different cables? Have you tried different
computers / different OSs or different OS versions? Anything
else beyond the error you encountered that might help provide
some clues? Does this error happen every time you execute any
UHD application such as "uhd_usrp_probe"? Or, is it on some
specific applications? - MLD
On Wed, Sep 9, 2015, at 09:29 PM, 18740449846 wrote:
i am using usrp b200
-------- 原始邮件 --------
Hi cdl - Which USRP are you using? USRP1, B200, B210?
Might make a difference ... - MLD
On Wed, Sep 9, 2015, at 12:22 PM, cdl wrote:
i am using uhd model
in gnuradio,usrp_sink and usrp_source to do a loopback
sysrem
and i connect the
usrp tx and rx withRF feeder line,when i exe the grc
,i got the output
UHD Error:
the receiver packet
handler caught an exception.
runtimeerror:usb rx6
transfer status:LIBUSB_TRANSFER_ERROR
UHD source block got
error code 0xf
i wants to konw how
tp solve this problem
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
|