[Discuss-gnuradio] gnuradio compiles no more on my computer, cannot figure out why

[Lecoq Yann]

Hello and a happy new year to all,

I used to compile gnuradio and uhd from git repos on a ubuntu 14.04 computer 
and, for whatever reason, the gnuradio compilation don't work anymore. There 
must be something I modified in the config that triggered that, but I can't 
figure out what (I started wanting to to recompile in order to activate comedi 
after installing the libcomedi-dev package, but wether this one is installed or 
nt dosnt help).

Typically I do a uhd cmake, make -j8, sudo make install and sudo ldconfig 
(which all look like they still work fine), and, then, a gnuradio cmake, make 
-j8, sudo make install and sudo ldconfig. Now, the gnuradio make stops with an 
error which looks related to the gr-uhd/swig component (see the console output 
at the end of this message).

To be sure, I used git to compile different combination of commits for both uhd 
and gnuradio, including at least 1 uhd+gnuradio commit combination which I am 
absolutely certain works on another similar computer, but it didn't help. I 
also tried removing entirely the source code in my ~/src directory and 
restarting from scrach (after some apt-get autoremove, update and upgrade) with 
M. Leech's "build_gnuradio" script, but this failed as well at the same point. 
Note that the check of prerequisites at the beginning of the script doesn't 
report anything missing though (except a usual libzmq1 issue which has never 
been a problem) (see end of message).

Any help is greatly appreciated, as I am running out of ideas to check at this 
point...

Best wishes,

-Yann



*** CONSOLE OUTPUT NEAR GNURADIO MAKING ERROR ***
Scanning dependencies of target _wxgui_swig
[ 57%] Building CXX object 
gr-wxgui/swig/CMakeFiles/_wxgui_swig.dir/wxgui_swigPYTHON_wrap.cxx.o
[ 57%] Built target pygen_gr_wavelet_swig_57e27
[ 57%] Building CXX object 
gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_sink_impl.cc.o
[ 57%] Building CXX object 
gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_source_impl.cc.o
/home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In 
function ‘void init_uhd_swig()’:
/home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46579:91:
 error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’
   SWIG_Python_SetConstant(d, 
"dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int 
>(uhd::usrp::dboard_iface::ATR_REG_IDLE)));
                                                                                
           ^
/home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46580:94:
 error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
   SWIG_Python_SetConstant(d, 
"dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int 
>(uhd::usrp::dboard_iface::ATR_REG_TX_ONLY)));
                                                                                
              ^
/home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46581:94:
 error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’
   SWIG_Python_SetConstant(d, 
"dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int 
>(uhd::usrp::dboard_iface::ATR_REG_RX_ONLY)));
                                                                                
              ^
/home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46582:98:
 error: ‘ATR_REG_FULL_DUPLEX’ is not a member of ‘uhd::usrp::dboard_iface’
   SWIG_Python_SetConstant(d, 
"dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int 
>(uhd::usrp::dboard_iface::ATR_REG_FULL_DUPLEX)));
                                                                                
                  ^
[ 57%] Building CXX object 
gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_meta_sink_impl.cc.o
make[2]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] 
Erreur 1
make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Erreur 2



*** CONSOLE OUTPUT FOR BUILD-GNURADIO PREREQS SCRIPT
Installing prerequisites.
====> THIS MAY TAKE QUITE SOME TIME <=====
Checking for package libfontconfig1-dev
Checking for package libxrender-dev
Checking for package libpulse-dev
Checking for package swig
Checking for package g++
Checking for package automake
Checking for package autoconf
Checking for package libtool
Checking for package python-dev
Checking for package libfftw3-dev
Checking for package libcppunit-dev
Checking for package libboost-all-dev
Checking for package libusb-dev
Checking for package libusb-1.0-0-dev
Checking for package fort77
Checking for package libsdl1.2-dev
Checking for package python-wxgtk2.8
Checking for package git-core
Checking for package libqt4-dev
Checking for package python-numpy
Checking for package ccache
Checking for package python-opengl
Checking for package libgsl0-dev
Checking for package python-cheetah
Checking for package python-mako
Checking for package python-lxml
Checking for package doxygen
Checking for package qt4-default
Checking for package qt4-dev-tools
Checking for package libusb-1.0-0-dev
Checking for package libqwt5-qt4-dev
Checking for package libqwtplot3d-qt4-dev
Checking for package pyqt4-dev-tools
Checking for package python-qwt5-qt4
Checking for package cmake
Checking for package git-core
Checking for package wget
Checking for package libxi-dev
Checking for package python-docutils
Checking for package gtk2-engines-pixbuf
Checking for package r-base-dev
Checking for package python-tk
Checking for package liborc-0.4-0
Checking for package liborc-0.4-dev
Checking for package libasound2-dev
Checking for package python-gtk2
Checking for package libzmq1
Checking for package libzmq1-dev
Failed to find package 'libzmq1-dev' in known package repositories
SOME THINGS MAY NOT BUILD AS A RESULT
Checking for package libzmq
Checking for package libzmq-dev
Checking for package python-requests
Done checking packages
Checking for library libusb ...Found library libusb
Checking for library libboost ...Found library libboost
Checking for library libcppunit ...Found library libcppunit
Checking for library libfftw ...Found library libfftw
Checking for library libgsl ...Found library libgsl
Done