Re: [Discuss-gnuradio] USRPs having the same IP address on a network

[Marcus Müller]

That contradicts your original statement that they were on the same network, but anyway:

You will need to inspect your computer's network configuration. Usually, you'd just tell the computer that the network attached to the network card that connects to the USRP has a netmask of 255.255.255.0, meaning that all IP addresses that start with 192.168.10. will be found at that port. But that is up to your configuration – maybe you have configured your system to *only* look for 192.168.10.2 on that port?

Best regards,
Marcus

On 18.01.2017 20:13, Qurat-Ul-Ann Akbar wrote:

Each USRP is connected with a different computer and therefore they both have separate Ethernet ports. There is no switch in between the computers and the USRPs.

Best,

Annie

On Wed, Jan 18, 2017 at 1:08 PM, <address@hidden> wrote:

We're going to need more of a description about how things are connected--do your USRPs have dedicated ethernet connections per computer, or are they connected to the same ports that your computers use to talk to the rest of your network?

 

 

 

On 2017-01-18 14:05, Qurat-Ul-Ann Akbar wrote:

Hi Marcus,

 

I have set the IP address of one USRPN210 to 192.168.10.3 replacing its default 192.168.10.2 IP but the I can not ping this USRP from a different computer which has the other USRP conneced to it. I can ping it from the same computer to which it is connected. Why is that? And how do you think I can fix this ?

 

Best,

Annie

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio