Re: [Discuss-gnuradio] Building gnuradio master fails

[Cinaed Simson]

On 05/23/2017 02:03 AM, address@hidden wrote:
> Full cmake output at 
> https://pastebin.com/4uwwZbcW
> 
> Here is the relevant portion of the cmake output. Everything is found.
> Now I suppose I could downgrade the libraries if that helps.
> 
> -- Checking for module 'gsl >= 1.10'
> --   Found gsl , version 2.3
> -- Found GSL: gsl;gslcblas;m  

gsl-2.3 might not be supported. I would start a new thread "suse and
gsl-2.3". See if anyone else is using gsl-2.3

-- Cinaed

> --
> -- Configuring gr-fec support...
> --   Dependency ENABLE_VOLK = ON
> --   Dependency Boost_FOUND = 1
> --   Dependency ENABLE_GNURADIO_RUNTIME = ON
> --   Dependency ENABLE_GR_BLOCKS = ON
> --   Enabling gr-fec support.
> --   Override with -DENABLE_GR_FEC=ON/OFF
> 
> 
> 
> On Mon, 22 May 2017 23:03:15 -0700
> Cinaed Simson <address@hidden> wrote:
> 
>> On 05/21/2017 08:02 PM, address@hidden wrote:
>>> It seems opensuse runs an old rev of gsl. Here are the relevant file
>>> names and revs:
>>>
>>> gsl 1.16-74
>>> gsl-devel 2.3-9.1
>>> libgsl19 2.3-9.1
>>> libgslblas0 2.3-9.1
>>> python-pygsl 0.9.5-2.30
>>> python-pygsl-devel 0.9.5-2.30  
>>
>> I'm running release version 3.7.11 with gsl-1.16.
>>
>> Actually, now that I think about it, I would be suprised if it built
>> gr-fec without gsl.
>>
>> It may not a be gsl problem - your mileage may vary depending upon the
>> version of gnuradio you're running.
>>
>> Create a new build directory and run cmake - it will tell you if
>> there's a problem with gsl.
>>
>> -- Cinaed
>>
>>>
>>> Using the science repo, I can upgrade gsl to rev 2.3. Yast will
>>> have to deinstall a number of programs such as krita and more
>>> significant, inkscape. I can build what breaks from source if the
>>> rev of gsl is the problem.
>>>
>>>
>>> On Sun, 21 May 2017 18:08:36 -0700
>>> address@hidden wrote:
>>>   
>>>>
>>>> "Latest commit 0e32fca 4 days ago." That comes right off of github.
>>>> https://github.com/gnuradio/gnuradio
>>>>
>>>> When I'm on that machine, I will research what I have for the gnu
>>>> scientific library. I have it, but don't know if it is up to date.
>>>>
>>>>
>>>>   Original Message  
>>>> From: Cinaed Simson
>>>> Sent: Sunday, May 21, 2017 5:52 PM
>>>> To: address@hidden
>>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
>>>>
>>>> On 05/21/2017 01:27 AM, address@hidden wrote:  
>>>>> FWIW, I just compiled 0e32fca on opensuse. It builds just fine,
>>>>> but I'm failing all the polar tests. Yeah I have scipy installed.
>>>>> I'll start a new thread on that when I've totally given up
>>>>> debugging. But the code on that rev is buildable on my PC.  
>>>>
>>>> I have no idea what 0e32fca is - looks like an arbitrary hex tag -
>>>> but if the tests in gr-fec are failing it's most likely because
>>>> development version of gsl wasn't installed - or it's the wrong
>>>> version.
>>>>
>>>> Can you simply install gsl and be on your merry way? Unlikely.
>>>>
>>>> -- Cinaed
>>>>
>>>>  
>>>>>
>>>>>
>>>>> On Sun, 21 May 2017 08:13:28 +0200
>>>>> "Ralph A. Schmid, dk5ras" <address@hidden> wrote:
>>>>>  
>>>>>> This is also my experience, I made exactly this, deleting the
>>>>>> build dir, make a new one, fresh cmake, and so on.
>>>>>>
>>>>>> Ralph.
>>>>>>
>>>>>>  
>>>>>>> -----Original Message-----
>>>>>>> From: address@hidden [mailto:address@hidden
>>>>>>> Sent: Saturday, 20 May, 2017 20:50
>>>>>>> To: Ralph A. Schmid, dk5ras; 'Kostis Triantafyllakis';
>>>>>>> address@hidden Subject: Re: [Discuss-gnuradio]
>>>>>>> Building gnuradio master fails
>>>>>>>
>>>>>>> Be that as it may, I have noticed that the first "cmake../",
>>>>>>> that is a fresh directory, produces different output than a
>>>>>>> "make clean" followed by "cmake ../". ‎ I've made it a point to
>>>>>>> do a "rm -r build".
>>>>>>>
>>>>>>> By output, I means whatever is written to standard output. I
>>>>>>> don't know if a fresh directly effects the actual build or not.
>>>>>>>
>>>>>>> Original Message
>>>>>>> From: Ralph A. Schmid, dk5ras
>>>>>>> Sent: Saturday, May 20, 2017 11:32 AM
>>>>>>> To: 'Kostis Triantafyllakis'; address@hidden
>>>>>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> Forgot to mention that of course I already did so - with no
>>>>>>> success...
>>>>>>>
>>>>>>> Ralph.
>>>>>>>  
>>>>>>>> -----Original Message-----
>>>>>>>> From: Kostis Triantafyllakis [mailto:address@hidden
>>>>>>>> Sent: Saturday, 20 May, 2017 18:19
>>>>>>>> To: Ralph A. Schmid, dk5ras; address@hidden
>>>>>>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails
>>>>>>>>
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> Cleaning (or even deleting the whole build directory) before
>>>>>>>> rebuilding, had helped me in similar cases.
>>>>>>>> Maybe you could give it a try
>>>>>>>>
>>>>>>>> Best,
>>>>>>>> Kostis
>>>>>>>>
>>>>>>>>
>>>>>>>> On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote:   
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> on a Kubuntu 16.04 system building gnuradio from source fails.
>>>>>>>>> Branch is master, downloaded right now.
>>>>>>>>>
>>>>>>>>> UHD is also the latest version from right now.
>>>>>>>>>
>>>>>>>>> Any ideas what it could be? Here the output:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> [ 99%] Built target _trellis_swig1
>>>>>>>>> [ 99%] Building CXX object
>>>>>>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
>>>>>>>>>
>>>>>>>>> [ 99%] Built target _trellis_swig0
>>>>>>>>> [ 99%] Built target pygen_gr_uhd_swig_08777
>>>>>>>>> [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
>>>>>>>>> [ 99%] Built target pygen_gr_vocoder_swig_43253
>>>>>>>>> [ 99%] Built target _video_sdl_swig
>>>>>>>>> [ 99%] Built target _vocoder_swig
>>>>>>>>> [ 99%] Built target pygen_gr_fcd_swig_c4332
>>>>>>>>> [ 99%] Built target _fcd_swig
>>>>>>>>> [ 99%] Built target pygen_gr_wavelet_swig_89b19
>>>>>>>>> [ 99%] Built target _wavelet_swig
>>>>>>>>> [ 99%] Built target pygen_gr_wxgui_swig_78659
>>>>>>>>> [100%] Built target _wxgui_swig
>>>>>>>>> [100%] Built target pygen_gr_zeromq_swig_4d7be
>>>>>>>>> [100%] Built target _zeromq_swig
>>>>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
>>>>>>>>> In   
>>>>>>>> function   
>>>>>>>>> ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*,
>>>>>>>>> PyObject*, PyObject*)’:
>>>>>>>>> /home/ras/gnuradio/build/gr-   
>>>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:  
>>>>>>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named   
>>>>>>> ‘set_gpio_debug’   
>>>>>>>>> (arg1)->set_gpio_debug(arg2,arg3);
>>>>>>>>> ^
>>>>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
>>>>>>>>> In   
>>>>>>>> function   
>>>>>>>>> ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*,  
>>>>>>> PyObject*,   
>>>>>>>>> PyObject*)’:
>>>>>>>>> /home/ras/gnuradio/build/gr-   
>>>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:  
>>>>>>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named   
>>>>>>> ‘set_gpio_debug’   
>>>>>>>>> (*arg1)->set_gpio_debug(arg2,arg3);
>>>>>>>>> ^
>>>>>>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
>>>>>>>>> In   
>>>>>>>> function   
>>>>>>>>> ‘void init_uhd_swig()’:
>>>>>>>>> /home/ras/gnuradio/build/gr-   
>>>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:  
>>>>>>>>> error: ‘ATR_REG_IDLE’ is not a member of
>>>>>>>>> ‘uhd::usrp::dboard_iface’ ant(d,
>>>>>>>>> "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int   
>>>>>>>>>> (uhd::usrp::   
>>>>>>>>> ^
>>>>>>>>> /home/ras/gnuradio/build/gr-   
>>>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:  
>>>>>>>>> error: ‘ATR_REG_TX_ONLY’ is not a member of
>>>>>>>>> ‘uhd::usrp::dboard_iface’ (d,
>>>>>>>>> "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast<
>>>>>>>>> int   
>>>>>>>>>> (uhd::usrp::   
>>>>>>>>> ^
>>>>>>>>> /home/ras/gnuradio/build/gr-   
>>>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:  
>>>>>>>>> error: ‘ATR_REG_RX_ONLY’ is not a member of
>>>>>>>>> ‘uhd::usrp::dboard_iface’ (d,
>>>>>>>>> "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast<
>>>>>>>>> int   
>>>>>>>>>> (uhd::usrp::   
>>>>>>>>> ^
>>>>>>>>> /home/ras/gnuradio/build/gr-   
>>>>>>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:  
>>>>>>>>> error: ‘ATR_REG_FULL_DUPLEX’ is not a member of   
>>>>>>> ‘uhd::usrp::dboard_iface’   
>>>>>>>>> "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast<
>>>>>>>>> int   
>>>>>>>>>> (uhd::usrp::   
>>>>>>>>> ^
>>>>>>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for
>>>>>>>>> target
>>>>>>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o'  
>>>>>>> failed   
>>>>>>>>> make[2]: ***
>>>>>>>>> [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o]  
>>>>>>> Error   
>>>>>>>> 1   
>>>>>>>>> CMakeFiles/Makefile2:15016: recipe for target
>>>>>>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
>>>>>>>>> make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error
>>>>>>>>> 2 Makefile:160: recipe for target 'all' failed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> Ralph A. Schmid
>>>>>>>>> Mondstr. 10
>>>>>>>>> 90762 Fürth
>>>>>>>>> +49-171-3631223
>>>>>>>>> address@hidden
>>>>>>>>> http://www.bclog.de/
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Discuss-gnuradio mailing list
>>>>>>>>> address@hidden
>>>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>>>>>>  
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Discuss-gnuradio mailing list
>>>>>>> address@hidden
>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio   
>>>>>>  
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Discuss-gnuradio mailing list
>>>>> address@hidden
>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>>  
>>>>
>>>>
>>>> _______________________________________________
>>>> Discuss-gnuradio mailing list
>>>> address@hidden
>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>
>>>> _______________________________________________
>>>> Discuss-gnuradio mailing list
>>>> address@hidden
>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio  
>>>
>>>   
>>
> 
>