[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Running gr-ieee 802.11 and gr-ieee 802.15.4 under
From: |
sumitstop |
Subject: |
Re: [Discuss-gnuradio] Running gr-ieee 802.11 and gr-ieee 802.15.4 under same flowgraph (interference and co-existence) |
Date: |
Sat, 8 Jul 2017 11:11:53 -0700 (MST) |
Wao superb! you cleaned it out also. Yes it works. Thanks much.
But did you figure out what was the issue at the first place :)
I have another related question about the wireshark connector in
transceiver_OQPSK.grc. I see that wireshark connector gets input from two
different outputs.
One from pdu_out of IEEE802.15.4 MAC and another from rxout of IEEE802.15.4
OQPSK PHY
When I see the output pcap file i..e sensor.pcap, same packet is logged
twice. I realized this by observing their sequence number field, which
repeats two times for every broadcast frame.
I have attached the pcap file for your reference.
sensor.pcap <http://gnuradio.4.n7.nabble.com/file/n64517/sensor.pcap>
I solved the issue by disconnecting one of the connectors but I am not sure
which one is correct.
pdu_out of IEEE802.15.4 MAC should go to wireshark
or
rxout of IEEE802.15.4 OQPSK PHY should go to wireshark
Both of the above dump correct wireshark capture.
Regards
Sumit
--
View this message in context:
http://gnuradio.4.n7.nabble.com/Running-gr-ieee-802-11-and-gr-ieee-802-15-4-under-same-flowgraph-interference-and-co-existence-tp64474p64517.html
Sent from the GnuRadio mailing list archive at Nabble.com.