Re: [Discuss-gnuradio] GNURadio build swig code fail on USB

[Cinaed Simson]

On 09/19/2017 09:50 AM, David wrote:
> Many Thanks Cinaed for going to this trouble :-).
> 
> My USB drive partitions:
> 
> Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disklabel type: dos
> Disk identifier: 0xa18426f3
> 
> Device     Boot Start       End   Sectors   Size Id Type
> /dev/sda1        2048 976773167 976771120 465.8G 83 Linux
> 
> Yes, quite big, but was using it for Windows backup :-).
> I should add, it's USB2, and is connected via a USB3 hub to the Odroid
> USB3.
> No idea if that make a difference.
> 
> I feel now I need to continue, I can build now on the USB2 (once a make
> install is
> done from the sd card!).

My guess is you have path problems.

Multiple installs of the same program is tricky business.

The test will be to uninstall gnuradio from the sdcard after the
installation on the usb, and see if the usb install works.

-- Cinaed


> 
> Thanks again ALL for you input,
> Dave
> 
> 
> 
> 
> On 19/09/17 01:08, Cinaed Simson wrote:
>> It works for me - but my setup is slightly different.
>>
>> I have a odroid-xu4 using emmc for the internal drive and it's running
>> Debian 8.8.
>>
>> Ubuntu is a fork of Debian so typically (system wise) what works on
>> Debian should work on Ubuntu.
>>
>> I started building gnuradio on a 64 GByte USB2 thumb drive plugged into
>> one of USB3 ports.
>>
>> I killed the build after it reached 50%.
>>
>> First, make sure the USB drive is mounted.
>>
>> Then look at the partitions on your USB drive - they should look similar
>> to the following - I'm using the entire USB drive as a single partition:
>>
>> address@hidden:/home/cinaed# fdisk -l /dev/sda
>>
>> Disk /dev/sda: 59.2 GiB, 63518539776 bytes, 124059648 sectors
>> Units: sectors of 1 * 512 = 512 bytes
>> Sector size (logical/physical): 512 bytes / 512 bytes
>> I/O size (minimum/optimal): 512 bytes / 512 bytes
>> Disklabel type: dos
>> Disk identifier: 0x00000000
>>
>> Device     Boot Start       End   Sectors  Size Id Type
>> dev/sda1          32 124059647 124059616 59.2G 83 Linux
>>
>> Make sure mounting of the USB drive is what you expect:
>>
>> address@hidden:/home/cinaed# mount | grep mnt
>> /dev/sda1 on /mnt type ext4 (rw,relatime,data=ordered)
>>
>> A make on SDCARD shouldn't impact a make on the USB drive.
>>
>> -- Cinaed
>>
>>
>> On 09/18/2017 09:18 AM, David wrote:
>>> oops,
>>>
>>> USB mount should be
>>>
>>> # mount /dev/sda1 /mnt
>>>
>>>
>>> On 18/09/17 17:09, David wrote:
>>>> Hi Cinaed,
>>>>
>>>> OS is installed on SD card (no emmc).
>>>>
>>>> I built UHD, as odroid user, on the USB drive, cmake, make, sudo make
>>>> install. Works fine.
>>>>
>>>> Then try to build GNURadio, as odroid user, on USB drive, cmake,
>>>> make... then the permission denied.
>>>> Tried building as root (after blowing away the build dir contents),
>>>> cmake, make, then the permission denied.
>>>>
>>>> Then build GNURadio, as odroid user, on SD card, cmake, make, sudo
>>>> make install. Works fine.
>>>>
>>>> Weird thing is, then I can then do make OK on the USB drive.
>>>> Is there some persistent info stored in odroid home dir, or elsewhere?
>>>> Because if I do make uninstall on the SD card, I can't then do a make
>>>> on the USB drive for same reason (after blowing the build dir away).
>>>>
>>>> I want to build on the USB drive so that I have all the build-able
>>>> source on the USB, in case I have to re-instate the OS, flexibility,
>>>> and reduced download time (as I have had to do several times due to
>>>> power issues causing corruptions on the SD card. This is probably
>>>> sorted now I have a good PSU, but also to reduce wear on the SD card.
>>>>
>>>> fstab mount:
>>>> UUID=eb5f2117-4e3c-459d-9f58-ef87e6428a25 /home/odroid ext4
>>>> defaults,noatime,user  0  2
>>>>
>>>> yet mounting as
>>>> # mount /dev/sdd1 /mnt
>>>> make no difference.
>>>>
>>>> Thank you,
>>>> Dave
>>>>
>>>>
>>>> On 18/09/17 07:02, Cinaed Simson wrote:
>>>>> On 09/17/2017 06:29 AM, David wrote:
>>>>>> Hi Cinaed,
>>>>>> Sorry no, USB build was first, after clean install of OS, then UHD.
>>>>> Just to be clear, you re-installed the os on the odroid and not the
>>>>> usb
>>>>> drive?
>>>>>
>>>>> Have you built the UHD software on the usb drive?
>>>>>
>>>>> Blow away the build directory and try it again.
>>>>>
>>>>> If it fails, try it as root.
>>>>>
>>>>> Look at the log files
>>>>>
>>>>>      dmesg
>>>>>      /var/log/messages
>>>>>      /var/log/syslog
>>>>>
>>>>>> Only "cmake .. " disabled component left was gr-comedi.
>>>>> Type
>>>>>
>>>>>     apt-get install libcomedi-dev
>>>>>
>>>>>> I think this may be a file-system thing, maybe how it is mounted?
>>>>>> Dave
>>>>> How did you mount it?
>>>>>
>>>>> Type
>>>>>
>>>>>     mount
>>>>>
>>>>> Are you using usb drive, sdcard and emmc card simultaneously on the
>>>>> droid?
>>>>>
>>>>> If you are, try removing the sdcard and build it as root on the usb
>>>>> drive.
>>>>>
>>>>> If worse comes to worse, tar the gnuradio installation on the
>>>>> sdcard and
>>>>> transfer it the usb drive. Then setup a link to so it matches the path
>>>>> to the gnuradio root.
>>>>>
>>>>> -- Cinaed
>>>>>
>>>>>> On 16/09/17 21:44, Cinaed Simson wrote:
>>>>>>> My guess is the sdcard version is installed and when your try to
>>>>>>> build
>>>>>>> the USB version, the paths are getting confused.
>>>>>>>
>>>>>>> I'd recommend doing a
>>>>>>>
>>>>>>>      make uninstall
>>>>>>>
>>>>>>> for the sdcard version, build the USB version, remove the USB stick
>>>>>>> then
>>>>>>>     re-install the sdcard version
>>>>>>>
>>>>>>>      make install
>>>>>>>
>>>>>>> To uninstall gnuradio you have to have a complete build directory.
>>>>>>>
>>>>>>> -- Cinaed
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 09/16/2017 07:48 AM, David wrote:
>>>>>>>> Hello Kyeong,
>>>>>>>>
>>>>>>>> Thanks for the reply, It's ext4, the OS is Ubuntu,
>>>>>>>>
>>>>>>>> Doing lsattr, for example:
>>>>>>>>
>>>>>>>> address@hidden:/mnt# lsattr
>>>>>>>> -------------e-- ./uhd
>>>>>>>> -------------e-- ./lost+found
>>>>>>>> -------------e-- ./gnuradio
>>>>>>>> -------------e-- ./gnuradio.broken
>>>>>>>>
>>>>>>>> Don't know if that is relevant, includes the permission denied
>>>>>>>> files,
>>>>>>>> and mounted:
>>>>>>>>
>>>>>>>> UUID=eb5f2117-4e3c-459d-9f58-ef87e6428a25 /home/odroid ext4
>>>>>>>> defaults,noatime,user  0  2
>>>>>>>>
>>>>>>>> Maybe a clue,
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> Dave
>>>>>>>>
>>>>>>>>
>>>>>>>> On 16/09/17 15:31, Kyeong Su Shin wrote:
>>>>>>>>> Hello David:
>>>>>>>>>
>>>>>>>>> How is your USB drive formatted? Is it using ext3/4, or something
>>>>>>>>> equivalent (POSIX-style)?
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Kyeong Su Shin
>>>>>>>>>
>>>>>>>>> On Sat, Sep 16, 2017 at 4:50 AM, David <address@hidden
>>>>>>>>> <mailto:address@hidden>> wrote:
>>>>>>>>>
>>>>>>>>>        Hi All,
>>>>>>>>>
>>>>>>>>>        Building GNURadio on a mounted USB drive (on an Odroid ARM
>>>>>>>>>        device), fails here:
>>>>>>>>>
>>>>>>>>>        Scanning dependencies of target _pmt_swig_doc_tag
>>>>>>>>>        [  9%] Building CXX object
>>>>>>>>> gnuradio-runtime/swig/CMakeFiles/_pmt_swig_doc_tag.dir/_pmt_swig_doc_tag.cpp.o
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>        [  9%] Linking CXX executable _pmt_swig_doc_tag
>>>>>>>>>        [  9%] Built target _pmt_swig_doc_tag
>>>>>>>>>        Scanning dependencies of target pmt_swig_swig_doc
>>>>>>>>>        [  9%] Generating doxygen xml for pmt_swig_doc docs
>>>>>>>>>        /bin/sh: 1: *./_pmt_swig_doc_tag: Permission denied*
>>>>>>>>> gnuradio-runtime/swig/CMakeFiles/pmt_swig_swig_doc.dir/build.make:72:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>        recipe for target
>>>>>>>>> 'gnuradio-runtime/swig/pmt_swig_doc_swig_docs/xml/index.xml'
>>>>>>>>> failed
>>>>>>>>>        make[2]: ***
>>>>>>>>> [gnuradio-runtime/swig/pmt_swig_doc_swig_docs/xml/index.xml]
>>>>>>>>> Error 126
>>>>>>>>>        CMakeFiles/Makefile2:1287: recipe for target
>>>>>>>>> 'gnuradio-runtime/swig/CMakeFiles/pmt_swig_swig_doc.dir/all'
>>>>>>>>> failed
>>>>>>>>>        make[1]: ***
>>>>>>>>> [gnuradio-runtime/swig/CMakeFiles/pmt_swig_swig_doc.dir/all]
>>>>>>>>> Error 2
>>>>>>>>>        Makefile:160: recipe for target 'all' failed
>>>>>>>>>        make: *** [all] Error 2
>>>>>>>>>
>>>>>>>>>        address@hidden:~/gnuradio/build$ find . -name
>>>>>>>>> _pmt_swig_doc_tag
>>>>>>>>>        ./gnuradio-runtime/swig/_pmt_swig_doc_tag
>>>>>>>>>
>>>>>>>>>        address@hidden:~/gnuradio/build$ *ls -l
>>>>>>>>>        ./gnuradio-runtime/swig/_pmt_swig_doc_tag**
>>>>>>>>>        -rwxrwxr-x 1 odroid odroid 8164 Sep 16 11:01
>>>>>>>>>        ./gnuradio-runtime/swig/_pmt_swig_doc_tag*
>>>>>>>>>
>>>>>>>>>        *
>>>>>>>>>        *
>>>>>>>>>
>>>>>>>>>        *Whereas, building on the local SD card works!*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>        Scanning dependencies of target runtime_swig_swig_doc
>>>>>>>>>        [ 11%] Built target runtime_swig_swig_doc
>>>>>>>>>        Scanning dependencies of target pmt_swig_swig_doc
>>>>>>>>>        [ 11%] Built target pmt_swig_swig_doc
>>>>>>>>>        Scanning dependencies of target _pmt_swig_swig_tag
>>>>>>>>>        [ 11%] Building CXX object
>>>>>>>>> gnuradio-runtime/swig/CMakeFiles/_pmt_swig_swig_tag.dir/_pmt_swig_swig_tag.cpp.o
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>        [ 11%] Linking CXX executable _pmt_swig_swig_tag
>>>>>>>>>        [ 11%] Built target _pmt_swig_swig_tag
>>>>>>>>>
>>>>>>>>>        Anyone encountered this, or knows why building swig on
>>>>>>>>> mounted USB
>>>>>>>>>        drive fails please?
>>>>>>>>>
>>>>>>>>>        Thanks,
>>>>>>>>>        Dave
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>        _______________________________________________
>>>>>>>>>        Discuss-gnuradio mailing list
>>>>>>>>>        address@hidden <mailto:address@hidden>
>>>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>>>>>> <https://lists.gnu.org/mailman/listinfo/discuss-gnuradio>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Discuss-gnuradio mailing list
>>>>>>>> address@hidden
>>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Discuss-gnuradio mailing list
>>>>>>> address@hidden
>>>>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>>>
>>
> 
>