discuss-gnuradio
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
[Discuss-gnuradio] Is It Possible to Access Multiple USRP N2x0s in the s
From
:
Zhongyuan Zhao
Subject
:
[Discuss-gnuradio] Is It Possible to Access Multiple USRP N2x0s in the same subnet?
Date
:
Mon, 22 Jan 2018 16:32:56 -0600
I want to access multiple USRPs from a host for MIMO. Currently, I need change IP address of host (subnet) to be able to access each USRP.
https://files.ettus.com/manual/page_usrp2.html
Configuration for USRP2 device 0:
Ethernet interface IPv4 address:
192.168.10.1
Ethernet interface subnet mask:
255.255.255.0
USRP2 device IPv4 address:
192.168.10.2
Configuration for USRP2 device 1:
Ethernet interface IPv4 address:
192.168.20.1
Ethernet interface subnet mask:
255.255.255.0
USRP2 device IPv4 address:
192.168.20.2
Is it possible to access multiple USRP without changing host IP? Say, if I change some of the FPGA code or UHD. Throughput is not that important. Is there any guideline for developing such FPGA code?
Thanks,
Zhongyuan Zhao
PhD Candidate,
Department of Computer Science & Engineering,
University of Nebraska-Lincoln
Office Hour: WF 9:30-10:00am, Avery Hall 12,
Suite 117, Schorr Center,
Lincoln, Nebraska
68588-0115
reply via email to
[Prev in Thread]
Current Thread
[
Next in Thread
]
[Discuss-gnuradio] Is It Possible to Access Multiple USRP N2x0s in the same subnet?
,
Zhongyuan Zhao
<=
Re: [Discuss-gnuradio] Is It Possible to Access Multiple USRP N2x0s in the same subnet?
,
Marcus D. Leech
,
2018/01/22
Prev by Date:
Re: [Discuss-gnuradio] oot modules in grc
Next by Date:
Re: [Discuss-gnuradio] oot modules in grc
Previous by thread:
[Discuss-gnuradio] oot modules in grc
Next by thread:
Re: [Discuss-gnuradio] Is It Possible to Access Multiple USRP N2x0s in the same subnet?
Index(es):
Date
Thread