[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Installing GNURadio On Raspberry Pi
From: |
lists |
Subject: |
Re: [Discuss-gnuradio] Installing GNURadio On Raspberry Pi |
Date: |
Wed, 24 Apr 2019 01:05:35 -0700 |
I built it on a beagle board black, which is not as powerful as a RPI these
days. This isn't all that fresh in my memory.
I don't recall having to set up VM beyond stock. Slow compilation...well yeah!
It might just be me, but the only signal processng I ever found useful on those
SBCs was ADSB decoding. Rtlsdr and some flavor of dump1090.
Original Message
From: address@hidden
Sent: April 24, 2019 12:51 AM
To: address@hidden; address@hidden; address@hidden
Subject: Re: [Discuss-gnuradio] Installing GNURadio On Raspberry Pi
Hi,
On Tue, 2019-04-23 at 19:31 -0700, lists wrote:
> https://wiki.gnuradio.org/index.php/Download
uhhh that wiki page is ... dated. It also doesn't solve the issue of
not being able to import gr-osmosdr, which isn't part of GNU Radio
itself!
Also, clearly *not* the way I'd recommend on a raspberry Pi:
What lazygranch recommends is a source build, which takes roughly
forever on a raspberry Pi, and requires use of copious amount of swap
memory, due to the limited amount of RAM of a Raspberry Pi.
So, if you can, get a binary installation of GNU Radio. It seems you
already have one!
Then, you'll need to make sure you've got a working gr-osmosdr
installation on your Pi. How did you install GNU Radio and gr-osmosdr
on your Raspberry Pi so far?
Best regards,
Marcus